The MagicMark™ XP Western Protein Standard is specifically designed for easy and convenient protein molecular weight estimation directly on western blots. The standard consists of 9 recombinant proteins each of which contains an IgG binding site. The IgG binding site binds the primary or secondary antibody used for detection of the target protein allowing direct visualization of the standard on the western blot. The MagicMark™ XP Standard is compatible with all western kits and substrates (chemiluminescent, chromogenic and fluorescent) and offers: • Direct visualization of molecular weight sta...
Size: 250 µl
The BigDye® Terminator v3.1 sequencing standard kit contains four tubes, each of which contains enough DNA of a known 1200 base pair sequence prepared with BigDye® Terminator v3.1 to perform one spectral calibration⁄performance check and⁄or one control sequencing run on the Applied Biosystems® 3500 Series Genetic Analyzer. The DNA contained in the preparation has been lyophilized to maximize stability. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Size: 4 tubes
The DS-30 Matrix Standard kit contains 4 oligonucleotides respectively labeled with 6-FAM™, HEX™, NED™, and ROX™, pre-pooled in a single tube. This Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing fluorescent dye-labeled DNA fragments on the Applied Biosystems® 3100, 3130, and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the four different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Size: 8 runs
The HiMark™ Unstained High Molecular Weight (HMW) Protein Standard is designed for analysis of high molecular weight proteins on Novex® NuPAGE® Tris-Acetate Gels . • Comprehensive – Contains markers with a wide range of high molecular weights, providing 9 protein bands in the range of 30-460 kDa • Convenient – A ready-to-use formulation eliminates the need to heat, reduce, or add sample buffer prior to use • Compatible – Intended for use with NuPAGE® Novex 3-8% and 7% Tris-Acetate Gels under denaturing conditions* *Note: HiMark™ Unstained High Molecular Weight Protein Standard can also be used...
Size: 250 µl
GeneScan™ 1000 ROX™ Size Standard is an internal lane size standard developed for use with Applied Biosystems® fluorescence-based DNA electrophoresis systems. The use of an internal lane size standard during electrophoresis enables automated data analysis and precise DNA fragment size comparisons between electrophoresis runs. GeneScan™ 1000 ROX™ Size Standard is designed for sizing DNA fragments in the 47–946 bp range and provides labeled fragments of 47, 51, 55, 82, 85 93 99, 126, 136, 262, 293, 317, 439, 557, 692, 695 and 946 bases. Each of the DNA fragments is labeled with ROX™ fluorophore,...
Size: 400 reactions
The Ambion® Quantu mRNA ™ 18S Internal Standard with Competimer™ technology uses specially modified Competimer™s of the same sequence as the normal 18S primers that cannot be extended. By adjusting the ratio of 18S Competimer™s to normal 18S mRNA primers, the signal for 18S mRNA can be attenuated to the level of very rare messages. They are used for quantitative end-point RT-PCR and include sufficient reagents for 100 reactions. Because of its invariant expression across tissues and treatments, 18S ribosomal RNA is an ideal internal control for quantitative RNA analysis. The Universal 18S Inte...
Size: 100 reactions
GeneScan™ 500 TAMRA™ Size Standard is an internal lane size standard developed for use with the Applied Biosystems fluorescence- based DNA electrophoresis systems. The use of an internal lane size standard during electrophoresis enables automated data analysis and precise DNA fragment size comparisons between electrophoresis runs. GeneScan™ 500 TAMRA™ Size Standard is designed for sizing DNA fragments in the 35-500 bp range and provides 16 single-stranded labeled fragments of 35, 50, 75, 100, 139, 150, 160, 200, 250, 300, 340, 350, 400, 450, 490, and 500 bases. Each of the DNA fragments is lab...
Size: 800 reactions
The DS-33 GeneScan™ Installation Standard consists of pooled PCR products labeled with 6-FAM™, VIC®, NED™ and PET® dyes. To generate the pooled products, CEPH individual 1347-02 genomic DNA has been amplified with 8 fluorescent PCR primer pairs which amplify selected microsatellite loci (as listed in the package product insert). The kit also contains a tube of GeneScan™ 600 LIZ™ Size Standard 2.0. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Size: 1 kit
The Matrix Standard Kit is used to generate the "multicomponent matrix" required when analyzing 6-FAM™, VIC®, NED™, PET®, and LIZ®- labeled DNA fragments on the Applied Biosystems® 31xx, 3500 and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the five different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Size: 8 runs
The GeneScan™ 1200 LIZ® Size Standard is a fifth dye (LIZ®) labeled high density size standard for the reproducible sizing of fragment analysis samples. The standard contains 68 LIZ® dye-labeled, single-stranded DNA fragments. Since the standard is labeled with the fifth dye, users can genotype a greater number of markers in a given lane, compared to the four-dye system. GeneScan™ 1200 LIZ® Size Standard is designed for sizing DNA fragments in the 20-1200 nucleotides range and provides 68 single-stranded labeled fragments of: 20, 30, 40, 60, 80, 100, 114, 120, 140, 160, 180, 200, 214, 220, 240...
Size: 800 reactions
The GeneScan™ 500 LIZ® Size Standard is a fifth dye-labeled size standard for the reproducible sizing of fragment analysis data. GeneScan™ 500 LIZ® Size Standard is designed for sizing DNA fragments in the 35-500 nucleotides range and provides 16 single-stranded labeled fragment of: 35, 50, 75, 100, 139, 150, 160, 200, 250, 300, 340, 350, 400, 450, 490 and 500 nucleotides. The sizing curve generated from these fragments make the GeneScan™ 500 LIZ® Size Standard ideal for a variety of fragment analysis applications such as Microsatellites, Fragment Length Polymorphisms and Relative Fluorescent ...
Size: 800 reactions
This kit contains 4 oligonucleotides respectively labeled with 6-FAM™, VIC®, NED™, and ROX™, pre-pooled in a single tube. Suitable for Dye Set D spectral calibration, on ABI PRISM® Analyzers: 3100-Avant™, 3100, and 3730. Supports 4-Dye fragment analysis applications (Linkage Mapping Set v2.5, Mouse Mapping Primers). The DS-31 Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing labeled DNA fragments on the Applied Biosystems® 3130 and 3100 Series Systems, 3700 DNA Analyzer, and 3730 Series Systems. The Data Collection Software for these instruments uses t...
Size: 8 runs
The SeeBlue® Plus2 Pre-Stained Standard has been optimized for compatibility with NuPAGE® and Bolt™ gels, which use Life Technologies' Bis-Tris gel formulation. The SeeBlue® Plus2 Pre-Stained Standard contains 10 proteins: eight blue-dyed proteins and two proteins with contrasting colors, allowing easier band identification. The SeeBlue® Plus2 Standard allows you to easily monitor molecular weight ranges during electrophoresis and quickly evaluate Western transfer efficiency. The SeeBlue® Plus2 Standard offers: • 10 polypeptides resolved into 8 blue and 2 colored bands in the range of 4–250 kD...
Size: 500 µl
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Size: 4 tubes
96-well plastic plates for nucleic acid elution on the KingFisher™ Flex system. For veterinary use only. Regulatory requirements vary by country; products may not be available in your geographic area. Biological hazard safety WARNING! BIOHAZARD. Biological samples such as tissues, body fluids, infectious agents, and blood of humans and other animals have the potential to transmit infectious diseases. All work should be conducted in properly equipped facilities using the appropriate safety equipment (for example, physical containment devices). Safety equipment also may include items for persona...
Size: 48 plates
This is a 96-well retainer & base set (standard) designed for use with the 3500 Dx⁄3500xL Dx Genetic Analyzer. Septa and plate base⁄retainer kits for 8 tube strip, 96 and 384-well plates used with the 3500 Dx Series Genetic Analyzers. Note: The 3500 Dx Series Systems and consumables are for distribution and use in select countries only.
Size: 4 sets
This easy-to-use kit establishes the pure dye spectra and multicomponent values for FAM™/SYBR® Green I, VIC®/JOE™, and ROX™ dyes on the StepOne™ Real-Time PCR System. Features of the StepOne™ Real-Time PCR System Spectral Calibration Kit include: • 48-well optical reaction plates preloaded with dyes (FAM™/SYBR® Green I, VIC®/JOE™, and ROX™) are provided for quick and easy calibration of the StepOne™ Real-Time PCR System • Easy-to-use and provides accurate discrimination of the fluorescence signal of individual dyes in the reaction mixture • Includes the Passive Reference I dye standard for sig...
Size: 1 kit
The 7300 & 7500 Real-Time PCR Systems TaqMan® RNase P Instrument Verification Plate is used to verify the performance of the Applied Biosystems® 7300 and 7500 Real-Time PCR Systems. The 7300 & 7500 Real-Time PCR Systems TaqMan® RNase P Instrument Verification Plate is a 96-well PCR plate preloaded with the necessary reagents to detect and quantitate genomic copies of the human RNase P gene, a single-copy gene encoding the RNA moiety of the RNase P enzyme. Each well contains preloaded reaction mix (1X TaqMan® Universal PCR Master Mix, RNase P primers, and FAM™ dye–labeled probe) and template. T...
Size: 1 kit
Class: RUO Statement: For research use only. Not for use in diagnostic procedures. Buffer: PBS Preservative: 0.1% Sodium Azide
Size: 25 ml
The Applied Biosystems® TaqMan® Rodent GAPDH Control Reagents provide the components for using rodent GAPDH as a normalization control in applications with rat, mouse, and Chinese hamster cells. • Pre-designed primers and TaqMan® probe eliminate assay design • Rapid assay development guidelines can minimize optimization time • Separate components provide flexibility in assay set-up Comprehensive Guidelines Included Applied Biosystems® has developed a comprehensive set of guidelines to ensure success when using Applied Biosystems® Real-Time PCR reagents and instrumentation. These guidelines are...
Size: 1000 reactions