The PureLink® Viral RNA/DNA Mini Kit is a nucleic acid purification system designed for fast and easy isolation of viral RNA or DNA from cell-free samples, such as serum, plasma, and cerebrospinal fluid. Starting sample volumes can be as high as 500 µl and elution volumes as low as 10 µl, allowing for a 50-fold concentration of nucleic acids. The higher target concentration obtained using the PureLink® Viral RNA/ DNA Mini Kit provides greater sensitivity and accuracy in downstream detection procedures such as real-time PCR or endpoint analysis. Specially formulated buffers enable the purificat...
Size: 100 tubes
Ambion® RNase-free Microfuge Tubes are guaranteed RNase- and DNase-free and have a positive seal design that withstands –90° to 120°C. They are marked with convenient graduations. 1.5 mL tubes are provided in a box of 500. Each lot of tubes is certified RNAse- and DNase-free.
Size: 500 tubes
Ambion® Non-Stick RNase-free Microfuge Tubes have a low binding surface and are guaranteed RNase- and DNase-free. They have a positive seal design that withstands –90° to 120°C and are marked with convenient graduations. 1.5 mL tubes are provided in a box of 250. Each lot of tubes is certified RNAse- and DNase-free.
Size: 250 tubes
Applied Biosystems® GeneAmp® Thin-Walled Reaction Tubes enable fast heat transfer for precise PCR in 0.5 mL PCR Systems. • Thin plastic enables fast heating and cooling for accurate results • Flat, frosted caps for easy marking • Captive lid with positive-click closure assures proper seating • Polished surface and conical bottom allow maximum sample recovery • Autoclaved tubes provide a clean, controlled start Rapid Heat Transfer The GeneAmp® Reaction Tube is made of specially engineered polypropylene and is optimized for use with the Veriti™ 60-Well Thermal Cycler and the Dual 96-Well GeneAmp...
Size: 1,000 tubes
Ambion® Acetylated BSA is used as a carrier protein and as an enzyme stabilizer in which the absence of contaminants such as nucleases and proteases is essential. Six tubes of 25 mg are provided, at a concentration of 40–50 mg/mL. The acetylation process inactivates any trace nuclease activity that might be present. While the acetylation process does change BSA's binding characteristics and makes it inhibitory in PCR reactions, it is routinely added to restriction digests. The molecular weight is ~66 kD. Acetylated BSA is rigorously tested for contaminating nonspecific endonuclease, exonucleas...
Size: 6 tubes
The new Gibco® bottle has its own bottle weight for keeping order in the water bath! The bottle weight fits the new 500 mL and 1 L Gibco® bottles, keeping them upright in the water to further reduce your risk of contamination. Product Use For Research Use Only. Not for use in diagnostic procedures.
Size: 1 each
Applied Biosystems® MicroAmp® Caps Strips are designed to fit on MicroAmp® 0.2 mL Reaction Tubes, Reaction Tube Strips, and 96-Well Reaction Plates. They are available in 8-cap and 12-cap strips in clear and colored sets of red, orange, blue, and green. The MicroAmp® Optical 8-Cap Strip should be used for real-time PCR applications. Attach caps using the MicroAmp® Cap Installing Tool. Will not interfere with sample reading Provides tight seal to minimize evaporation Easy to apply and remove Minimizes Evaporation Use MicroAmp® Caps Strips to seal the tubes containing your precious samples. This...
Size: 200 strips of Assorted Colors
The Applied Biosystems® MicroAmp® Caps Strips are designed to fit on MicroAmp® Reaction Tubes, reaction strips and 96-well plates. They are available in 8-cap and 12-cap strips in clear and colored sets of red, orange, blue, and green. MicroAmp® Optical 8-Cap Strip should be used for Real-Time PCR applications. Attach caps using the MicroAmp® Cap Installing Tool. • Will not interfere with sample reading • Provides tight seal to minimize evaporation • Easy to apply and remove Minimize Evaporation Use MicroAmp® Caps Strips to seal the tubes containing your precious samples. This will reduce the ...
Size: 300 strips
The Applied Biosystems® MicroAmp® Optical Adhesive Film reduces the chance of well-to-well contamination and sample evaporation when applied to a microplate. • Pressure-sensitive adhesive provides a tight seal over every well • Will not interfere with sample reading • Press-N-Seal: Align properly to the plate, then press to seal • Easy to apply-will not stick to your glove Prevent Loss of Precious Samples Use this optically-clear adhesive film to seal the samples into the wells of a microplate. This will reduce the possibility of cross-contamination between sample wells and help ensure consist...
Size: 25 covers
Applied Biosystems® MicroAmp® Optical Film Compression Pads are designed to support a proper thermal seal between the thermal cycler and reaction plates when using adhesive films. Note: See user's manual or package insert for limited label license, and trademark information. For Research Use Only. Not for use in diagnostics procedures.
Size: 5 each
The Applied Biosystems® MicroAmp® 96-Well Tray for VeriFlex™ Blocks is specifically designed to snugly hold MicroAmp® Fast Reaction Tubes with Caps and MicroAmp® Fast 8-Tube Strips (0.1 mL) in a 96-well format. They are also designed to snugly hold MicroAmp® Reaction Tubes with Caps (0.2 mL). Engineered for efficient sample processing Designed specifically for MicroAmp® Fast Reaction Tubes with Caps (0.1 mL) and MicroAmp® Fast 8-Tube Strips (0.1 mL) Designed specifically for MicroAmp® Reaction Tubes with Caps (0.2 mL) Manufactured to high specification, ensuring a quality product Convenience a...
Size: 10 trays
Use Applied Biosystems® MicroAmp® Adhesive Film Applicator to form a tight seal between a microplate and an adhesive film. Form a Tight Seal The MicroAmp® Adhesive Film Applicator enables you to ergonomically push an adhesive film down upon a microplate to form a tight seal and minimize air bubbles. This tight seal will prevent well-to-well contamination and sample loss. Quick and Easy Use the MicroAmp® Adhesive Film Applicator to speed the process of sealing multiple microplates. This tool is designed according to the microplate dimensions so you can quickly seal a microplate. The rugged prop...
Size: 5 applicators
The AuthentiFiler™ PCR Amplification Kit is a short tandem-repeat multiplex PCR assay that amplifies 9 unique STR loci and the amelogenin gender-determining marker in a single PCR amplification. This kit is intended for use in human cell identification in various research-based applications requiring human cell discrimination and identity confirmation, such as authentication testing of human cell culture lines and genetic confirmation testing of induced pluripotent stem cells (iPSC). --> The AuthentiFiler™ PCR Amplification Kit is: • An efficient, low-cost PCR amplification kit designed to con...
Size: 50 tests