Streptavidin Agarose
UltraPure™ Agarose is a polysaccharide (see structure below) used for size-based separation of nucleic acids in agarose gel electrophoresis applications. UltraPure™ Agarose is ideal for resolving DNA and RNA fragments from 500 bp to > 20 kb. • Ideal for analysis and recovery of DNA and RNA for routine applications • Strong gel structure allows for better handling and less breakage • Can be used in protein electrophoresis applications such as Ouchterlony (antigen-antibody interaction assay) and radial immunodiffusion (RID) (antigen quantitation assay) Improved Packaging The new environmentally ...
Catalog: 16500100
Size: 100 g
Size: 100 g
Our streptavidin, Marina Blue™ conjugate is a bright, blue-fluorescent probe with excitation/emission ~365/460 nm. Streptavidin is a nonglycosylated biotin-binding protein that is isolated from bacteria and has a near-neutral isoelectric point. It is widely used to detect biotinylated probes, because it reportedly exhibits less nonspecific binding than does the glycosylated, biotin-binding protein, avidin.
Catalog: S-11221
Size: 1 mg
Size: 1 mg
Reactivity: FITC-SA will react with biotin.
Catalog: 43-4311
Size: 1 mg
Size: 1 mg
The pcDNA™6 BioEase™ Gateway® Biotinylation System provides an easy, efficient method for expressing, purifying, and detecting biotinylated recombinant proteins. The pcDNA™6/BioEase™-DEST vector (Figure 1) incorporates a 72 amino acid sequence from K. pneumoniae that directs in vivo biotinylation of a specific lysine residue. This K. pneumoniae tag is recognized and efficiently biotinylated in vivo by a native mammalian system similar to the enzyme Biotin Protein Ligase (BPL) in E. coli (1). Proteins produced from the pcDNA™6/BioEase™-DEST vector are expressed as fusion proteins to this sequen...
Catalog: SA100-02
Size: 50 µl
Size: 50 µl
Streptavidin-Horseradish Peroxidase (HRP) conjugate
Catalog: SA100-01
Size: 50 µl
Size: 50 µl
This enzyme conjugate solution can be used to stain biotinylated antibodies.
Catalog: 50-209Z
Size: 15 ml
Size: 15 ml
UltraPure™ Low Melting Point Agarose is a polysaccharide used for size-based separation of nucleic acids in agarose gel electrophoresis applications. UltraPure™ Low Melting Point Agarose is ideal for resolving DNA and RNA fragments larger than 1,000 bp and for the recovery of nucleic acid fragments after electrophoresis, as it melts at 65.5°C (below the melting point of most nucleic acids). The solution remains fluid at 37°C and will set rapidly at temperatures below 25°C. • Ideal for analysis and recovery of DNA and RNA for routine applications • Strong gel structure allows for better handlin...
Catalog: 16520100
Size: 100 g
Size: 100 g
DNA Grade Agarose has a high sieve capacity, providing optimal resolution of DNA during gel electrophoresis. The low sulfur content allows gels to be run faster without becoming brittle. Supplied as a powder that is reconstituted in 0.5X TBE for high-quality agarose gels.
Catalog: 75000-500
Size: 500 g
Size: 500 g
Reactivity: CY5-SA reacts with biotin.
Catalog: 43-4316
Size: 1 mg
Size: 1 mg
Streptavidin-coupled Dynabeads® is the gold standard for isolation and handling of biotinylated nucleic acids, antibodies or other biotinylated ligands and targets. The very high binding affinity of the streptavidin-biotin interaction (Kd=10 -15 ) is utilized in a vast number of applications. These uniform and superparamagnetic beads are 1 µm in diameter, with a monolayer - not a multilayer - of recombinant streptavidin covalently coupled to the surface and further blocked with BSA. The monolayer of streptavidin leaves the vast majority of the biotin binding sites sterically available for bind...
Catalog: 65602
Size: 10 ml
Size: 10 ml
UltraPure™ Agarose is a polysaccharide (see structure below) used for size-based separation of nucleic acids in agarose gel electrophoresis applications. UltraPure™ Agarose is ideal for resolving DNA and RNA fragments from 500 bp to > 20 kb. • Ideal for analysis and recovery of DNA and RNA for routine applications • Strong gel structure allows for better handling and less breakage • Can be used in protein electrophoresis applications such as Ouchterlony (antigen-antibody interaction assay) and radial immunodiffusion (RID) (antigen quantitation assay) Improved Packaging The new environmentally ...
Catalog: 16500500
Size: 500 g
Size: 500 g
Gibco® 4% Agarose is an autoclaved, high purity, low melting point gel designed for plaque assays and the purification of baculovirus. The 4% Agarose Gel melts at 65 – 70°C and remains fluid at 37°C. When diluted with concentrated insect cell culture medium, Gibco® 4% Agarose produces a gel firm enough to immobilize local infections, yet ductile enough to allow for the efficient removal of plaques for clonal expansion. Product Use For Research Use Only. Not for use in diagnostic procedures.
Catalog: 18300-012
Size: 40 ml
Size: 40 ml
Reactivity: CY3-SA reacts with biotin.
Catalog: 43-4315
Size: 1 ml
Size: 1 ml
Alexa Fluor® 647 streptavidin comprises a biotin-binding protein (streptavidin) covalently attached to a fluorescent label (Alexa Fluor® dye). Streptavidin has a very high binding affinity for biotin, and a conjugate of streptavidin is commonly used together with a conjugate of biotin for specific detection of a variety of proteins, protein motifs, nucleic acids, and other molecules (for example, a biotinylated primary antibody bound to a protein target can be detected with a fluorescently labeled streptavidin). Strategies similar to this are used in many detection protocols including western ...
Catalog: S-21374
Size: 1 mg
Size: 1 mg
Alexa Fluor® 488 streptavidin comprises a biotin-binding protein (streptavidin) covalently attached to a fluorescent label (Alexa Fluor® dye). Streptavidin has a very high binding affinity for biotin, and a conjugate of streptavidin is commonly used together with a conjugate of biotin for specific detection of a variety of proteins, protein motifs, nucleic acids, and other molecules (for example, a biotinylated primary antibody bound to a protein target can be detected with a fluorescently labeled streptavidin). Strategies similar to this are used in many detection protocols including western ...
Catalog: S-32354
Size: 0.5 ml
Size: 0.5 ml
Qdot® 625 Streptavidin Conjugate comprises a biotin-binding protein (streptavidin) covalently attached to a fluorescent label (Qdot® nanocrystal). Streptavidin has a very high binding affinity for biotin, and a conjugate of streptavidin is commonly used together with a conjugate of biotin for specific detection of a variety of proteins, protein motifs, nucleic acids, and other molecules (for example, a biotinylated primary antibody bound to a protein target can be detected with a fluorescently labeled streptavidin). Strategies similar to this are used in many detection protocols including west...
Catalog: Q22063
Size: 50 µl
Size: 50 µl
Our Streptavidin, Pacific Green™ conjugate, is a Molecular Probes® fluorescent probe that absorbs at at 411 nm and is optimally excited by the violet laser. Streptavidin is a non-glycosylated biotin-binding protein isolated from bacteria with a near-neutral isoelectric point. It is widely used to detect biotinylated probes because it reportedly exhibits less non-specific binding than the glycosylated, biotin-binding protein avidin.
Catalog: S11200
Size: 500 µl
Size: 500 µl
Affinity purified whole antibody goat anti-mouse IgG conjugated to 4% beaded, crosslinked agarose (Sepharose® CL-4B). To minimize cross-reactivity, this antibody has been absorbed against human IgG and human serum.
Catalog: A10516
Size: 2 ml
Size: 2 ml
Glutathione agarose prepared by linking the sulfur atom of glutathione to crosslinked beaded agarose can be used for purification of GST fusion proteins. Each milliliter of gel can bind approximately 5-6 mg of boivine-liver GST. Adding excess free glutathione liberates the GST fragment from the matrix which can then be regenerated by washing with a high-salt buffer.
Catalog: G2879
Size: 10 ml
Size: 10 ml
Exosome - Streptavidin for Isolation/Detection, when combined with your choice of biotinylated primary antibody, enables the purification of exosomes (also called extracellular vesicles and multi-vesicular bodies) from pre-enriched samples. These exosomes can then be detected using techniques such as flow cytometry, electron microscopy, or Western blotting. The exosomes must be pre-enriched before isolation. This can be done by ultracentrifugation, or by using the fast and efficient Total Exosome Isolation (from cell culture media) reagent. • Maximum flexibility with your choice of biotinylate...
Catalog: 106-08D
Size: 3 ml
Size: 3 ml
Streptavidin Agarose
Previous: Solid™ Ez Bead™ Enricher | Next: Streptavidin Agarose Beads
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Solid™ Ez Bead™ Enricher | Next: Streptavidin Agarose Beads
