Category: Products & Services > Instruments, Software, & Accessories > Instruments > Sequencing & Genetic Analyzer Instruments
The 310 Genetic Analyzer is an automated single-capillary genetic analyzer designed for a wide range of sequencing and fragment analysis applications. • Perform comparative sequencing, linkage analysis, STR analysis, SNP detection, discovery and validation, mutation detection, and many other applications. • Eliminate gel preparation. • Set up runs in minutes. • Automate your workflow to minimize hands-on time and costs. • Detect five dyes simultaneously to increase throughput. Versatile, Affordable, Easy-to-Use, and Almost Hands-Free The 310 Genetic Analyzer – the ideal alternative to gel-base...
Catalog: 310-00-100-120WR
Size: 1 instrument
Category: Products & Services > Instruments, Software, & Accessories > Instruments > Sequencing & Genetic Analyzer Instruments
The 3500 Dx Genetic Analyzer CS2 is the latest addition to our family of Applied Biosystems® genetic analyzers based on capillary electrophoresis. The 3500 Dx Genetic Analyzer CS2 is an IVD-labeled instrument, making it the first Sanger sequencing platform cleared for sequencing analysis of DNA. Confidence in Your Results • The 3500 Dx Genetic Analyzer CS2 is an IVD-labeled platform for Sequencing-Based Typing using SeCore® HLA typing kits. Sanger sequencing is known as the “gold-standard” for its accuracy, reliability, and ease of use. It is also used for confirmatory sequencing by clinical l...
Catalog: 4461447
Size: 1 system
Category: Products & Services > Instruments, Software, & Accessories > Instruments > Sequencing & Genetic Analyzer Instruments
The 3500 Dx Genetic Analyzer CS2 is the latest addition to our family of Applied Biosystems® genetic analyzers based on capillary electrophoresis. The 3500 Dx Genetic Analyzer CS2 is an IVD-labeled instrument, making it the first Sanger sequencing platform cleared for sequencing analysis of DNA. Confidence in Your Results • The 3500 Dx Genetic Analyzer CS2 is an IVD-labeled platform for Sequencing-Based Typing using SeCore® HLA typing kits. Sanger sequencing is known as the “gold-standard” for its accuracy, reliability, and ease of use. It is also used for confirmatory sequencing by clinical l...
Catalog: 4461450
Size: 1 system
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
This is a pump cleaning kit for the 3500 Series platform. It is highly recommended that a field service engineer perform any necessary pump cleaning.
Catalog: 4461875
Size: 1 each
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
This cap may be placed on an open 3500 Series polymer pouch when the pouch is to be stored.
Catalog: 4462785
Size: 4 caps
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The 5500 W FlowChip V2 is a microfluidic glass device with primers on the surface that enable amplification of library template onto the FlowChip for ligation sequencing on the 5500 W Series genetic analyzers. The 5500 W FlowChip V2 is specially designed with precisely cut lanes. Individual library samples can be deposited for amplification in each lane of the FlowChip. Sequencing reagents are delivered to each lane separately, enabling consumption of sequencing reagents for just the number of lanes used for sequencing. The 5500 W FlowChip V2 is notched to set the orientation. Each 5500 W Flow...
Catalog: 4475661
Size: 1 kit
Category: Products & Services > Controls, Standards & Ladders > Instrument Calibration Kits, Standards & Reagents > DNA Sequencing & Matrix Standards
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500 Dx CS2 instrument and comes with a 50-cm 8-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462042
Size: 1 kit
Category: Products & Services > Controls, Standards & Ladders > Instrument Calibration Kits, Standards & Reagents > DNA Sequencing & Matrix Standards
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500xL Dx CS2 instrument and comes with a 50-cm 24-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462043
Size: 1 kit
Category: Products & Services > Instruments, Software, & Accessories > Software > Sequencing & Genetic Analysis Software
This product can only be used to upgrade Sequencing Analysis Software v5.3.1 installed on standalone computers, computers separate to the instrument data collection system. Please talk with your representative to upgrade the data collection system and secondary analysis software running on the data collection computer. Sequencing Analysis Software enables you to basecall, trim, display, edit, and print data from our entire line of capillary DNA sequencing instruments for data analysis and quality control. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4310991
Size: 1 CD
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
Borosilicate round bottom tubes (13 mm x 65 mm) and caps for use with the Covaris™ S2 System. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4399054
Size: 125 tube
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Bioruptor® UCD-200 is a benchtop sonication device used to uniformly process up to 12 x 0.5 ml samples simultaneously in sealed tubes without aerosol formation. Consisting of a high-power ultrasound generating element located below a water bath, the Bioruptor® sonicates at a 20 kHz frequency, similar to a probe sonicator. The Bioruptor® comes with standard 0.5 ml accessories and the BioBox-200 for soundproofing. The Bioruptor® UCD-200 Provides: • Parallel processing of up to 12 DNA samples • Robust and reproducible results • Automated sample prep Get Reproducible DNA Shearing Easily and Au...
Catalog: 4465622
Size: 1 each
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Covaris® M220 microTUBE Accessory Kit is the perfect starting kit for Ion PGM™ users. It enables tight DNA fragment distributions tunable between 150 and 1,500 bp. The kit includes a microTUBE holder, 25 screw-cap microTUBEs optimized for 50 µl samples, and 25 snap-cap microTUBEs optimized for 130 µl samples. The kit also includes a preparation station easy loading and unloading of sample into microTUBEs.
Catalog: 4482278
Size: 1 kit
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Covaris® M220 microTUBE Prep Station enables the easy loading of sample into snap-cap and screw-cap microTUBEs. Each package contains 1 preparation station.
Catalog: 4482270
Size: 1 each
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Covaris® M220 miniTUBE Holder is required to process the sample tube in the M220 Focused-ultrasonicator™. This holder is compatible with clear, blue, and red miniTUBEs. Each package contains 1 holder station.
Catalog: 4482281
Size: 1 kit
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Elga® Pressure Regulator is an adjustable inlet pressure regulator with a gauge used to reduce inlet feed water pressure. For use with the PURELAB® flex 2 Water Purification System only when the purified feed water pressure is greater than 22 psi. Recommended setting is 10 psi.
Catalog: 4482275
Size: 1 each
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
Sanitization Pack for the PURELAB® flex. The Sanitization Cartridge sanitizes tubing or pipe work to remove bacteria, reduce bio film, and protect the system against bacterial growth. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4474537
Size: 1 pack
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Covaris® M220 microTUBE Holder is required to process the sample tube in the M220 Focused-ultrasonicator™. This holder is compatible with snap-cap and screw-cap microTUBEs. Each package contains 1 holder station.
Catalog: 4482279
Size: 1 kit
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Covaris® M220 miniTUBE Accessory Kit is ideally suited for Ion PGM™ users requiring large DNA fragments for their applications (mate-paired libraries, etc), providing tight DNA fragment distributions centered on 2,000, 3,000 or 5,000 bp. The kit includes a holder, 25 clear miniTUBEs for 2 kb fragments, 25 blue miniTUBEs for 3 kb fragments, and 25 red miniTUBEs for 5 kb fragments. The kit also includes a preparation station for easy loading and unloading of sample into the miniTUBEs.
Catalog: 4482276
Size: 1 kit
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Covaris® M220 miniTUBE Prep Station enables the easy loading of sample into clear, blue, or red miniTUBEs. A tilted stand is included that has been designed to help recover the entire sample from the miniTUBE. Each package contains 1 preparation station.
Catalog: 4482267
Size: 1 each
Category: Products & Services > Instruments, Software, & Accessories > Instrument Accessories > Sequencing & Genetic Analyzer Instrument Accessories
The Ion Total RNA Library Protocol Card for AB Library Builder™System is required for running the Ion Total RNA-Seq Kit for AB for Library Builder™System . This protocol card contains the firmware needed to easily automate the creation of up to 13 whole transcriptome or small RNA (miRNA) libraries upstream of semiconductor sequencing on either the Ion PGM™ or Ion Proton™ platforms. The Ion Total RNA Library Protocol Card for AB Library Builder™System: • Enables whole transcriptome or small RNA (miRNA) library construction on the AB Library Builder™System • Eliminates the need for instrument pr...
Catalog: 4482563
Size: 1 card