Reactive Dyes
ROX Reference Dye is designed to normalize the fluorescent reporter signal in real-time quantitative PCR or RT-PCR. This dye has been qualified for use on the ABI PRISM® 7700 with Platinum® Quantitative PCR SuperMix-UDG® , Platinum® Quantitative RT-PCR ThermoScript™ One-Step System, and SuperScript® III Platinum® One-Step qRT-PCR Kit. ROX Reference Dye: Normalizes non-PCR-related fluctuations in fluorescence Provides a stable baseline for multiplex quantitative PCR and RT-PCR Uses existing ROX spectral settings, eliminating the need to re-calibrate the thermal cycler
Catalog: 12223-012
Size: 500 µl
Size: 500 µl
The DS-30 Matrix Standard kit contains 4 oligonucleotides respectively labeled with 6-FAM™, HEX™, NED™, and ROX™, pre-pooled in a single tube. This Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing fluorescent dye-labeled DNA fragments on the Applied Biosystems® 3100, 3130, and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the four different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345827
Size: 8 runs
Size: 8 runs
FISH Tag™ DNA Kits provide a complete workflow solution for fluorescence in situ hybridization (FISH) applications. Each kit provides all of the reagents needed for probe synthesis, labeling, and purification, as well as for imaging the labeled specimen. Choose from FISH Tag™ DNA Kits in three Alexa Fluor® colors or get the FISH Tag™ DNA Multicolor Kit , which contains four spectrally distinct dyes to allow simultaneous localization of multiple sequence-specific DNA targets in chromosomal spreads and for in situ analysis of mitochondrial DNA localization and content. FISH Tag™ Kit Specificatio...
Catalog: F32947
Size: 1 kit
Size: 1 kit
Contains 45 mg 6-FAM™ Dye Phosphoramidite. 6-FAM™ Dye Phosphoramidite is used for the 5’ attachment of FAM™ dye during oligonucleotide synthesis. 6-FAM™ Dye Phosphoramidite is an optically pure isomer (not a mixture). The label is treated as if it were simply another base: It is inserted at the appropriate place in the sequence and incorporated automatically. • Specialty phosphoramidites allow online addition of the label during synthesis, saving time in production of labeled probes and primers • Designed and optimized for use with ABI™ synthesizers, guaranteeing reliable nucleic acid synthesi...
Catalog: 403169
Size: 45 mg
Size: 45 mg
The FISH Tag™ DNA Multicolor Kit provides a complete workflow solution for fluorescence in situ hybridization (FISH) applications. Each kit provides all of the reagents needed for probe synthesis, labeling, and purification, as well as for imaging the labeled specimen. The FISH Tag™ DNA Multicolor Kit contains fluorescent dyes in four colors, making it ideal for simultaneous localization of multiple sequence-specific DNA targets in chromosomal spreads and for in situ analysis of mitochondrial DNA localization and content. We also offer FISH Tag™ Kits in single colors. FISH Tag™ Kit Specificati...
Catalog: F32951
Size: 1 kit
Size: 1 kit
Contains 50 mg TET™ Dye Phosphoramidite. TET™ Dye Phosphoramidite is used for the 5’ attachment of TET™ dye during oligonucleotide synthesis. The label is treated as if it were simply another base: It is inserted at the appropriate place in the sequence and incorporated automatically. • Specialty phosphoramidites allow online addition of the label during synthesis, saving time in production of labeled probes and primers • Designed and optimized for use with ABI™ synthesizers, guaranteeing reliable nucleic acid synthesis • Life Technologies offers a range of specialty phosphoramites and linkers...
Catalog: 403171
Size: 50 mg
Size: 50 mg
The Matrix Standard Kit is used to generate the "multicomponent matrix" required when analyzing 6-FAM™, VIC®, NED™, PET®, and LIZ®- labeled DNA fragments on the Applied Biosystems® 31xx, 3500 and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the five different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345833
Size: 8 runs
Size: 8 runs
This kit contains 4 oligonucleotides respectively labeled with 6-FAM™, VIC®, NED™, and ROX™, pre-pooled in a single tube. Suitable for Dye Set D spectral calibration, on ABI PRISM® Analyzers: 3100-Avant™, 3100, and 3730. Supports 4-Dye fragment analysis applications (Linkage Mapping Set v2.5, Mouse Mapping Primers). The DS-31 Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing labeled DNA fragments on the Applied Biosystems® 3130 and 3100 Series Systems, 3700 DNA Analyzer, and 3730 Series Systems. The Data Collection Software for these instruments uses t...
Catalog: 4345829
Size: 8 runs
Size: 8 runs
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Catalog: 4462113
Size: 4 tubes
Size: 4 tubes
The 384-Well Dye Calibration Plate (FAM™) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432445
Size: 1 plate
Size: 1 plate
The 384-Well Dye Calibration Plate (ROX™) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432458
Size: 1 plate
Size: 1 plate
The 384-Well Dye Calibration Plate (TAMRA™) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4443619
Size: 1 plate
Size: 1 plate
The 384-Well Dye Calibration Plate (VIC®) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432452
Size: 1 plate
Size: 1 plate
The 96-Well Dye Calibration Plate (FAM™) is used to maintain your real-time PCR instrument with standard 96-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432538
Size: 1 plate
Size: 1 plate
The 96-Well Dye Calibration Plate (ROX™) is used to maintain your real-time PCR instrument with standard 96-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432551
Size: 1 plate
Size: 1 plate
The 96-Well Dye Calibration Plate (TAMRA™) is used to maintain your real-time PCR instrument with standard 96-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4442918
Size: 1 plate
Size: 1 plate
The 96-Well Dye Calibration Plate (VIC®) is used to maintain your real-time PCR instrument with standard 96-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432545
Size: 1 plate
Size: 1 plate
The Array Card Dye Calibration Kit is used to maintain your real-time PCR instrument with array card block. Dye calibration should be run after lamp change. The kit contains FAM™, VIC®, ROX™, ROI, and background calibration plates, as well as FAM™/ROX™ and VIC®/ROX™ normalization plates. Please see your instrument user guide for full instructions on use.
Catalog: 4432438
Size: 7 arrays
Size: 7 arrays
The Fast 96-Well Dye Calibration Plate (FAM™) is used to maintain your real-time PCR instrument with Fast 96-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432600
Size: 1 plate
Size: 1 plate
The Fast 96-Well Dye Calibration Plate (ROX™) is used to maintain your real-time PCR instrument with Fast 96-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432614
Size: 1 plate
Size: 1 plate
Reactive Dyes
Previous: Qubit Dna⁄Rna Polymerases | Next: Rna Stability Storage Buffer
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Qubit Dna⁄Rna Polymerases | Next: Rna Stability Storage Buffer
