Novex® Tris-Glycine polyacrylamide gel chemistry is based on the Laemmli system (1) with minor modifications for maximum performance in the pre-cast format. These gels do not contain SDS and can therefore be used to accurately separate both native and denatured proteins. Novex® Tris-Glycine Gels provide reproducible separation of a wide range of proteins into well-resolved bands. Formulation: Novex® Tris-Glycine Gels are made with high-purity, strictly quality-controlled reagents: Tris base, HCl, acrylamide, bisacrylamide, TEMED, APS, and highly purified water. They do not contain SDS. Recomme...
Size: 20 ml
NuPAGE® LDS Sample Buffer (4X) (10 ml) is used to prepare protein samples for denaturing gel electrophoresis with the NuPAGE® gels. Optimal protein sample preparation for polyacrylamide gel electrophoresis (PAGE) requires denaturing and reducing the protein disulfide bonds. NuPAGE® LDS Sample Buffer contains lithium dodecyl sulfate at a pH of 8.4, which allows for maximal activity of the reducing agent. For native gel electrophoresis, use Novex® Tris-Glycine Native Sample Buffer (2X) . Note: NuPAGE® LDS Sample Buffer should be brought to room temperature (25°C) prior to use. NuPAGE® LDS Sample...
Size: 10 ml
NuPAGE® LDS Sample Buffer (4X) (250 ml) is used to prepare protein samples for denaturing gel electrophoresis with the NuPAGE® gels. Optimal protein sample preparation for polyacrylamide gel electrophoresis (PAGE) requires denaturing and reducing the protein disulfide bonds. NuPAGE® LDS Sample Buffer contains lithium dodecyl sulfate at a pH of 8.4, which allows for maximal activity of the reducing agent. For native gel electrophoresis, use Novex® Tris-Glycine Native Sample Buffer (2X) . Note: NuPAGE® LDS Sample Buffer should be brought to room temperature (25°C) prior to use. NuPAGE® LDS Sampl...
Size: 250 ml
Denaturing polyacrylamide TBE-Urea Gels resolve single-stranded DNA oligos or RNA into sharp, distinct bands. Novex® TBE-Urea Gels are optimized for the analysis and purification of products ranging from 20-800 bases, making them an ideal choice for synthetic oligo analysis and purification, RNase Protection Assays (RPA), in vitro transcription studies, and Northern blot analysis. Novex® TBE-Urea Gels are designed to run on the XCell SureLock ™ Mini-Cell. Formulation: Novex® TBE-Urea Gels are made with high-purity reagents, including tris base, boric acid, EDTA, acrylamide, bisacrylamide, TEME...
Size: 10 ml
Novex® TBE Gels provide the highest resolution possible for analyzing restriction digests and PCR products. DNA fragments ranging from 10 to 3,000 base pairs are clearly resolved into sharp, tight bands. Novex® DNA Retardation gels are prepared with 0.5X TBE as the gel buffer. This is sufficient for good electrophoretic separation, yet low enough to promote DNA-protein interactions. Novex® TBE and DNA Retardation Gels are designed to run on the XCell SureLock ™ Mini-Cell. Formulation: Novex® TBE and DNA Retardation Gels are manufactured with high-purity tris base, boric acid, EDTA, acrylamide,...
Size: 10 ml
NuPAGE® Novex 3-8% Tris-Acetate Midi-Gels provide excellent separation of large molecular weight proteins when used with NuPAGE® Tris-Acetate SDS Running Buffer. NuPAGE® Novex Tris-Acetate gels can also be run with Tris-Glycine Native Running Buffer to resolve native proteins more effectively than the Tris-Glycine gel system. NuPAGE® Novex Tris-Acetate Midi-Gels (8 x 13 cm) can run up to 26 samples. The NuPAGE Midi-Gels run in the XCell4 Surelock™ Midi-Cell and, with a Midi Gel Adapter, can run in a Bio-Rad Criterion Cell. Formulation: NuPAGE® Novex Tris-Acetate gels are made with high-purity,...
Size: 1 kit
NativePAGE™ 5% G-250 Sample Additive is added to samples prepared with the NativePAGE™ Sample Buffer and detergents (10% DMM or 5% Digitonin) just prior to applying the samples to NativePAGE™ gels. This Additive is also included in the NativePAGE™ Sample Prep Kit. The samples prepared with 10% DDM, 5% Digitonin, or the NativePAGE™ Sample Prep Kit are compatible with NativePAGE™ Novex Bis-Tris Gels for native electrophoresis showing increased resolution and reduced streaking.
Size: 0.5 ml
A 1–2X solution of 95% Formamide, 18 mM EDTA, and 0.025% SDS, Xylene Cyanol, and Bromophenol Blue. Supplied in one 1.4 mL tube. All Ambion® Gel Loading Solutions are rigorously tested for non-specific endonuclease activity, exonuclease activity, RNase activity, and for functionality. These are the same solutions we use in-house and in our kits.
Size: 1 ml
The TrackIt™ Loading Buffers are a 6X solution used for easy loading and tracking of DNA samples in agarose gels. These loading buffers contain two tracking dyes, one that runs behind the sample and one that runs ahead of the sample. The tracking dyes serve as visual markers for following migration during electrophoresis and indicate when maximum resolution of the DNA fragments has been achieved. Additionally, visualization of DNA bands will not be obscured by the tracking dyes because they run outside the limits of most DNA samples. TrackIt™ Cyan/Orange Loading Buffer is recommended for DNA f...
Size: 3 × 0.5 ml
BlueJuice™ Gel Loading Buffer is designed for easy loading and tracking of DNA samples in agarose or native polyacrylamide gels.
Size: 3 × 1 ml
Cell extraction buffer suitable for use in ELISA and Western blotting.
Size: 100 ml
The Ambion® Buffer Kit provides high quality, RNase free buffers for critical RNA analysis procedures. The kit consists of one 100 mL bottle of each of the following solutions: 1 M Tris pH 7.0, 1 M Tris pH 8.0, 5 M NaCl, 1 M MgCl 2 , 0.5 M EDTA pH 8.0, 2 M KCl, 5 M Ammonium Acetate, and DEPC-treated H 2 O. Ammonium Acetate is sterile filtered. All other solutions are autoclaved post-packaging to ensure sterility. These reagents are rigorously tested for contaminating nonspecific endonuclease, exonuclease, and RNase activity.
Size: 1 set
This sequencing buffer is optimized for use with BigDye® Terminator v1.1 and v3.1 Cycle Sequencing Kits. For Research Use Only. Not for use in diagnostics procedures.
Size: 233 ml
Size: 100 tablets
These 2 buffers are to be used only as a complement to the SuperScript® III Platinum® CellsDirect Kits when large number of samples are processed. See manual of SuperScript® III Platinum® CellsDirect Kits for protocol recommendations.
Size: 1 kit
Applied Biosystems® GeneAmp®10X PCR Gold Buffer is formulated to provide flexible, efficient activation of AmpliTaq Gold® DNA Polymerase, resulting in highly specific, robust PCR amplification. When diluted 1:10, provides the optimal pH and ionic strength for PCR activation and amplification with AmpliTaq Gold® DNA Polymerase, ensuring maximum performance Available in several convenient sizes GeneAmp® 10X PCR Buffer II is both magnesium ion free and gelatin free. A separate MgCl 2 solution is provided. When used together, GeneAmp® 10X PCR Buffer II and MgCl 2 solution offer more versatility in...
Size: 6 × 1.5 ml
NuPAGE® Transfer Buffer (20X) (125 ml) is a buffer used to transfer proteins from NuPAGE® gels to membranes for western blotting. NuPAGE® Transfer Buffer can be used with the Novex® Semi-Dry Blotter for semi-dry transfer or with the XCell II™ Blot Module for wet (tank) transfer. NuPAGE® Antioxidant may be used with NuPAGE® Transfer Buffer to enhance transfer of reduced proteins to membranes. For Research Use Only. Not intended for animal or human therapeutic or diagnostic use. Related Link • Learn more about other Invitrogen products for your protein transfer needs .
Size: 125 ml
The 1X TE Buffer is a component in the PureLink™ 96 Plasmid Purification System. The 1X TE buffer is used to resuspend the final purified plasmid pellet and contains very low EDTA, so it is compatible with sequencing and other enzymatic applications.
Size: 100 ml
The same lysis buffer found in the Ambion® Cells-to-Signal™ Kit. Supplied in 5 bottles containing 10 mL each.
Size: 5 bottle
Gibco® Cell Dissociation Buffer is a membrane-filtered, isotonic, and enzyme-free solution of salts, chelating agents, and cell-conditioning agents in calcium-free and magnesium-free Phosphate Buffered Saline (PBS). Gibco® Cell Dissociation Buffer is suitable for gentle dissociation of mammalian cells for studies requiring intact cell surface proteins such as ligand binding, flow cytometry, and immunohistochemistry. Gibco® Cell Dissociation Buffer works well with lightly adherent cell lines such as HeLa and NIH 3T3, but is not recommended for routine passage of strongly adherent cells. The dis...
Size: 100 ml