Our Magnetic Particle Concentrators (MPC®) enable optimal binding of Dynabeads® magnetic beads with their targets (e.g., cells, proteins, and nucleic acids) in a variety of starting samples. The MPC®-S was designed specifically for microbiology applications; it has been validated with select Dynabeads® for enrichment of E. coli O157:H7, Salmonella, non-O157 STEC, Cryptosporidium, and Giardia. The MPC®-S can be used with both food enrichment samples types as well as water samples. It holds up to six microcentrifuge tubes and has an optimal working volume range of 20 µl–2 ml. Note that this magn...
Size: 1 unit
The Magnetic 96-Well Separator is designed for fast and simple removal of supernatant from samples bound to magnetic particles and may be used manually or as an integrated part of an automated workstation. The Magnetic 96-Well Separator is an ideal tool for use in singleplex and multiplex biological assays based on the Luminex® xMAP® Technology. These assays make use of Luminex® MagPlex™, or magnetic microspheres, and the MAGPIX®, Luminex® 200™ or FLEXMAP 3D® instruments. Note: It is recommended that the Magnetic 96-Well Separator be used with a standard 96-well flat-bottom plate such as Grein...
Size: 1 each
Magnetic Stand is part of the I-SAGE kit
For the paramagnetic bead precipitation from standard 96-well U-bottom microplates and 0.2 mL PCR plates with no additional accessories. The Ambion® stand has a clear polyacryl base in a standard SBS 96-well microplate footprint. The use of 24 extremely strong permanent magnets guarantees easy and fast (as little as 30 seconds) magnetic separation. It sits flat on a lab bench, as well as in a microplate adapter on robotic workstations. The Magnetic Stand-96 has a total of 24 magnets (4 wells surround each magnet), so the magnetic beads are attracted to one side of each well. Accessory Product ...
Size: 1 each
The Ambion® Single Tube Magnetic Stand accommodates one 1.5 mL microfuge tube. With this stand, as with any magnetic stand, centrifugation is replaced by the attraction between capture beads in a solution and the magnet in the stand, resulting in the beads collecting on one side of the microfuge tube. Thus, the captured species (e.g., mRNA) is quickly and efficiently separated from the solution's other components.
Size: 1 each
The new DynaMag™-2 magnet is optimized for efficient magnetic separation in small sample volumes using Dynabeads®. The DynaMag™-2 magnet combines a strong magnetic attraction for efficient separations with a flexible and smart ergonomic design. The top rack can be easily removed from the magnet in the base, ready for resuspension, vortexing, rotation or manual sample shaking. A center pin in the rack ensures equal vortexing of all tubes. The rack can also be removed and used to store tubes. The magnet can be used with all types of Dynabeads® for efficient isolation of proteins and nucleic acid...
The DynaMag™-5 Magnet is intended for use with Dynabeads® for the immunomagnetic separation of cells. The DynaMag™-5 magnet accommodates tubes from 11–16 mm in diameter (e.g., flow cytometry tubes and most blood collection tubes), with an optimal working volume of 1–5 mL. The magnet holds 8 tubes and is compatible with all Dynabeads® (1–4.5 µM in diameter). When performing cell separation using Dynabeads®, a DynaMag™ magnet is required. Different magnets are optimized for different working volumes and tube sizes. See our complete overview of the DynaMag™ magnets . The DynaMag™-5 magnet contain...
Size: 8 samples
The Pathatrix® Magnetic Capture Rack makes it easy to link the Pathatrix® Auto workflow to specific endpoint detection technologies including Idaho R.A.P.I.D. ® LT, bioMerieux VIDAS®, and BioControl GDS instruments. The magnetic rack is used to remove the paramagnetic particles after lysis and prior to detection.
Size: 1 each
Novex® Tris-Glycine polyacrylamide gel chemistry is based on the Laemmli system (1) with minor modifications for maximum performance in the pre-cast format. These gels do not contain SDS and can therefore be used to accurately separate both native and denatured proteins. Novex® Tris-Glycine Gels provide reproducible separation of a wide range of proteins into well-resolved bands. Formulation: Novex® Tris-Glycine Gels are made with high-purity, strictly quality-controlled reagents: Tris base, HCl, acrylamide, bisacrylamide, TEMED, APS, and highly purified water. They do not contain SDS. Recomme...
Size: 20 ml
NuPAGE® LDS Sample Buffer (4X) (10 ml) is used to prepare protein samples for denaturing gel electrophoresis with the NuPAGE® gels. Optimal protein sample preparation for polyacrylamide gel electrophoresis (PAGE) requires denaturing and reducing the protein disulfide bonds. NuPAGE® LDS Sample Buffer contains lithium dodecyl sulfate at a pH of 8.4, which allows for maximal activity of the reducing agent. For native gel electrophoresis, use Novex® Tris-Glycine Native Sample Buffer (2X) . Note: NuPAGE® LDS Sample Buffer should be brought to room temperature (25°C) prior to use. NuPAGE® LDS Sample...
Size: 10 ml
NativePAGE™ 5% G-250 Sample Additive is added to samples prepared with the NativePAGE™ Sample Buffer and detergents (10% DMM or 5% Digitonin) just prior to applying the samples to NativePAGE™ gels. This Additive is also included in the NativePAGE™ Sample Prep Kit. The samples prepared with 10% DDM, 5% Digitonin, or the NativePAGE™ Sample Prep Kit are compatible with NativePAGE™ Novex Bis-Tris Gels for native electrophoresis showing increased resolution and reduced streaking.
Size: 0.5 ml
NuPAGE® LDS Sample Buffer (4X) (250 ml) is used to prepare protein samples for denaturing gel electrophoresis with the NuPAGE® gels. Optimal protein sample preparation for polyacrylamide gel electrophoresis (PAGE) requires denaturing and reducing the protein disulfide bonds. NuPAGE® LDS Sample Buffer contains lithium dodecyl sulfate at a pH of 8.4, which allows for maximal activity of the reducing agent. For native gel electrophoresis, use Novex® Tris-Glycine Native Sample Buffer (2X) . Note: NuPAGE® LDS Sample Buffer should be brought to room temperature (25°C) prior to use. NuPAGE® LDS Sampl...
Size: 250 ml
Denaturing polyacrylamide TBE-Urea Gels resolve single-stranded DNA oligos or RNA into sharp, distinct bands. Novex® TBE-Urea Gels are optimized for the analysis and purification of products ranging from 20-800 bases, making them an ideal choice for synthetic oligo analysis and purification, RNase Protection Assays (RPA), in vitro transcription studies, and Northern blot analysis. Novex® TBE-Urea Gels are designed to run on the XCell SureLock ™ Mini-Cell. Formulation: Novex® TBE-Urea Gels are made with high-purity reagents, including tris base, boric acid, EDTA, acrylamide, bisacrylamide, TEME...
Size: 10 ml
The PrepMan® Ultra Sample Preparation Reagent was developed for the rapid preparation of DNA template from Gram-negative food-borne pathogens for use in PCR amplification reactions. These samples often have high lipid content that can inhibit PCR amplification of the template. Using a simple boil and spin protocol, PrepMan®Ultra Reagent efficiently inactivates PCR inhibitors, significantly reducing the need to repeat the template preparation step. PrepMan® Ultra reagent has been used to prepare PCR-ready template from a wide variety of different sources, including bacteria, yeast, filamentous ...
Size: 1 kit
Novex® TBE Gels provide the highest resolution possible for analyzing restriction digests and PCR products. DNA fragments ranging from 10 to 3,000 base pairs are clearly resolved into sharp, tight bands. Novex® DNA Retardation gels are prepared with 0.5X TBE as the gel buffer. This is sufficient for good electrophoretic separation, yet low enough to promote DNA-protein interactions. Novex® TBE and DNA Retardation Gels are designed to run on the XCell SureLock ™ Mini-Cell. Formulation: Novex® TBE and DNA Retardation Gels are manufactured with high-purity tris base, boric acid, EDTA, acrylamide,...
Size: 10 ml
MagMAX™ DNA Multi-Sample 96-Well Kits are designed for rapid purification of high-quality genomic DNA from a variety of sample types including blood and blood cards, tissue, mouse tails, buccal swabs, buffy coats, and cultured cells. These purification kits use MagMAX™ magnetic bead-based nucleic acid isolation technology to produce high yields of purified DNA, free from inhibitors that may affect downstream reactions such as genotyping assays, CE and next-generation sequencing, and high resolution melting analysis. The 96-prep and 5x 96-prep kits are designed for higher throughput and automat...
Size: 5 x 96 preps
NuPAGE® Reducing Agent (10X) (10 ml) is used to reduce protein samples for protein gel electrophoresis. NuPAGE® Reducing Agent contains 500 mM dithiothreitol (DTT) at a ready-to-use 10X concentration in a stabilized liquid form. Use NuPAGE® Sample Reducing Agent when running proteins on NuPAGE® Bis-Tris gels to maintain protein samples in a reduced state during electrophoresis. For Research Use Only. Not intended for animal or human therapeutic or diagnostic use.
Size: 10 ml
The Protein Quant Sample Lysis Kit contains the reagents required for the preparation of target and control cell lysates for use with TaqMan® Protein Assay experiments. It contains a one-step lysis solution for preparing crude cell lysates from cultured cells, and the lysates are compatible with cell counting as well as total protein quant measurements such as a microBCA assay. The Protein Quant Sample Lysis Kit contains a buffered nonionic detergent solution for the gentle lysis of adherent and non-adherent cultured cells under non-denaturing conditions
Size: 25 ml
The resDNASEQ® MDCK Residual DNA Quantitation System is a quantitative PCR (qPCR)-based system for the detection of host cell DNA from MDCK (canine kidney) cells, an expression system commonly used for the production of vaccines. Reliable and rapid, the resDNASEQ® system enables sensitive (as low as 1.5 pg DNA/mL test sample) and specific quantitation of MDCK cell DNA, typically in less than 4 hours. This performance helps ensure a high degree of confidence in quantitation data obtained from a broad range of sample types—from in-process samples to final product—whether the sample contains high...
Size: 100 reactions
The resDNASEQ® NS0 Residual DNA Quantitation System is a quantitative PCR (qPCR)-based system for the detection of host cell DNA from NS0 (murine myeloma) cells, an expression system commonly used for the production of vaccines. Reliable and rapid, the resDNASEQ® system enables sensitive (as low as 1.5 pg DNA/mL test sample) and specific quantitation of NS0 cell DNA, typically in less than 4 hours. This performance helps ensure a high degree of confidence in quantitation data obtained from a broad range of sample types—from in-process samples to final product—whether the sample contains high m...
Size: 100 reactions