Magnetic Particle

Dynabeads® MPC®-S (Magnetic Particle Concentrator)

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

Our Magnetic Particle Concentrators (MPC®) enable optimal binding of Dynabeads® magnetic beads with their targets (e.g., cells, proteins, and nucleic acids) in a variety of starting samples. The MPC®-S was designed specifically for microbiology applications; it has been validated with select Dynabeads® for enrichment of E. coli O157:H7, Salmonella, non-O157 STEC, Cryptosporidium, and Giardia. The MPC®-S can be used with both food enrichment samples types as well as water samples. It holds up to six microcentrifuge tubes and has an optimal working volume range of 20 µl–2 ml. Note that this magn...
Catalog: A13346
Size: 1 unit

Invitrogen Magnetic Stand

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

Magnetic Stand is part of the I-SAGE kit
Catalog: R670-01
Size: each

Magnetic Stand-96

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

For the paramagnetic bead precipitation from standard 96-well U-bottom microplates and 0.2 mL PCR plates with no additional accessories. The Ambion® stand has a clear polyacryl base in a standard SBS 96-well microplate footprint. The use of 24 extremely strong permanent magnets guarantees easy and fast (as little as 30 seconds) magnetic separation. It sits flat on a lab bench, as well as in a microplate adapter on robotic workstations. The Magnetic Stand-96 has a total of 24 magnets (4 wells surround each magnet), so the magnetic beads are attracted to one side of each well. Accessory Product ...
Catalog: AM10027
Size: 1 each

Single Place Magnetic Stand

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

The Ambion® Single Tube Magnetic Stand accommodates one 1.5 mL microfuge tube. With this stand, as with any magnetic stand, centrifugation is replaced by the attraction between capture beads in a solution and the magnet in the stand, resulting in the beads collecting on one side of the microfuge tube. Thus, the captured species (e.g., mRNA) is quickly and efficiently separated from the solution's other components.
Catalog: AM10026
Size: 1 each

Magnetic 96-Well Separator

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

The Magnetic 96-Well Separator is designed for fast and simple removal of supernatant from samples bound to magnetic particles and may be used manually or as an integrated part of an automated workstation. The Magnetic 96-Well Separator is an ideal tool for use in singleplex and multiplex biological assays based on the Luminex® xMAP® Technology. These assays make use of Luminex® MagPlex™, or magnetic microspheres, and the MAGPIX®, Luminex® 200™ or FLEXMAP 3D® instruments. Note: It is recommended that the Magnetic 96-Well Separator be used with a standard 96-well flat-bottom plate such as Grein...
Catalog: A14179
Size: 1 each

DynaMag™-2 Magnet

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

The new DynaMag™-2 magnet is optimized for efficient magnetic separation in small sample volumes using Dynabeads®. The DynaMag™-2 magnet combines a strong magnetic attraction for efficient separations with a flexible and smart ergonomic design. The top rack can be easily removed from the magnet in the base, ready for resuspension, vortexing, rotation or manual sample shaking. A center pin in the rack ensures equal vortexing of all tubes. The rack can also be removed and used to store tubes. The magnet can be used with all types of Dynabeads® for efficient isolation of proteins and nucleic acid...
Catalog: 12321D
Size: each

DynaMag™-5 Magnet

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

The DynaMag™-5 Magnet is intended for use with Dynabeads® for the immunomagnetic separation of cells. The DynaMag™-5 magnet accommodates tubes from 11–16 mm in diameter (e.g., flow cytometry tubes and most blood collection tubes), with an optimal working volume of 1–5 mL. The magnet holds 8 tubes and is compatible with all Dynabeads® (1–4.5 µM in diameter). When performing cell separation using Dynabeads®, a DynaMag™ magnet is required. Different magnets are optimized for different working volumes and tube sizes. See our complete overview of the DynaMag™ magnets . The DynaMag™-5 magnet contain...
Catalog: 12303D
Size: 8 samples

Pathatrix® Magnetic Capture Rack

Category: Products & Services > Instruments, Software, & Accessories > Instruments > Magnets & Sample Mixers

The Pathatrix® Magnetic Capture Rack makes it easy to link the Pathatrix® Auto workflow to specific endpoint detection technologies including Idaho R.A.P.I.D. ® LT, bioMerieux VIDAS®, and BioControl GDS instruments. The magnetic rack is used to remove the paramagnetic particles after lysis and prior to detection.
Catalog: MAGNETICRACK
Size: 1 each

Escherichia coli (K-12 strain) BioParticles®, BODIPY® FL Conjugate

Category: Products & Services > Kits & Assays > Cell Analysis Kits > Phagocytosis Kits & Phagocytic Particles

The Molecular Probes® BioParticles® product line consists of a series of fluorescently labeled, heat- or chemically killed bacteria and yeast in a variety of sizes, shapes, and natural antigenicities. These fluorescent BioParticles® products have been employed to study phagocytosis by fluorescence microscopy, quantitative spectrofluorometry, and flow cytometry. We offer E. coli (K-12 strain), S. aureus (Wood strain, without protein A) and zymosan ( S. cerevisiae ) BioParticles® conjugates covalently labeled with a variety of different fluorophores (special care has been taken to remove free dy...
Catalog: E-2864
Size: 10 mg