gel blot
Replacement Parts for Electrophoresis Apparatus
Catalog: EI9052
Size: each
Size: each
Invitrogen makes blotting of E-PAGE™ Gels easier and more efficient by providing a pre-cut fiber blotting pad and several types of pre-cut, pre-assembled membrane/filter paper sandwiches that perfectly fit 8.6 cm x 13.5 cm E-PAGE™ Gels*. The available nitrocellulose and Invitrolon™ PVDF membranes are designed for western transfer of proteins (Figure 1, Table 1). Pre-cut, extra-thick, absorbent Blotting Paper (2.5 mm thickness) for E-PAGE" Gels are also available to accommodate the E-PAGE™ blotting set-up using a semi-dry transfer apparatus. A protein s properties affect its ability to bind to ...
Catalog: LC2101
Size: 4 pads
Size: 4 pads
The Blotting Roller is an 8.6 cm wide roller designed for easy and efficient removal of bubbles when assembling gel/membrane sandwiches for blotting both E-PAGE™ Gels and mini-gels such as NuPAGE® and Novex¤ Tris-Glycine Gels. It consists of a Delrin roller attached to a stainless steel handle. The Incubation Tray enables convenient and even staining of E-PAGE™ blots. The tray is 10 cm (l) x 14 cm (w) x 3 cm (d) with a lid. It is suitable for use with immunodetection or blot stains.
Catalog: LC2100
Size: 1 unit
Size: 1 unit
The Blotting Tweezer is a replacement part for the Bolt™ Mini Blot Module. It is for general use of handling nitrocellulose or PVDF membranes. About the Bolt™ Mini Blot Module The Bolt™ Mini Blot Module is a wet transfer device used exclusively with the Bolt™ Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Bolt™ Mini Blot Module is compatible with Bolt™ Bis-Tris Plus gels and accommodates one gel per wet transfer. The universal connection and molded gasket make the blot module easy to use, while the inner core of the...
Catalog: B1002
Size: 1 unit
Size: 1 unit
The Bolt® Mini Blot Module Gasket is a replacement part for the Bolt® Mini Blot Module. The gasket fits on the cathode core (-) of the blot module. About the Bolt® Mini Blot Module The Bolt® Mini Blot Module is a wet transfer device used exclusively with the Bolt® Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Bolt® Mini Blot Module is compatible with Bolt® Bis-Tris Plus gels and accommodates one gel per wet transfer. The universal connection and molded gasket make the blot module easy to use, while the inner core o...
Catalog: B1001
Size: 1 unit
Size: 1 unit
The Bolt® Mini Blot Module is a wet transfer device used exclusively with the Bolt® Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. The Bolt® Mini Blot Module is compatible with Bolt® Bis-Tris Plus gels and accommodates one gel per wet transfer. The universal connection and molded gasket make the blot module easy to use, while the inner core of the blot module allows for use of less methanol-based transfer buffer per wet transfer. At the recommended conditions and constant voltage, proteins can be transferred to nitrocel...
Catalog: B1000
Size: 1 unit
Size: 1 unit
The XCell II™ Blot Module allows you to easily transfer proteins or nucleic acids from mini-gels to membranes. It fits neatly into the XCell SureLock ™ and XCell II™ Mini-Cells in place of the gel/buffer core assembly. It requires less than 200 ml of transfer buffer for western, Southern, and northern transfers. Tough platinized titanium and stainless steel electrodes create a uniform electrical field without clamps or hinged gel holders. Maximum blot size is 9 cm x 9 cm.
Catalog: EI9051
Size: 1 unit
Size: 1 unit
The XCell line of mini-cells has always distinguished itself by being simple, sturdy, and convenient. The tradition continues with the patented XCell SureLock ® Mini-Cell. The incorporation of a gel tension wedge in place of the rear wedge used on earlier models makes the XCell SureLock ® the easiest-to-use mini-cell on the market. How the System Works The XCell SureLock ® Mini-Cell holds gels firmly with a simple gel tension wedge. When the lever on the gel tension wedge is pushed forward into the locked position, an even horizontal force is generated. This seals the gel/buffer core assembly ...
Catalog: EI0002
Size: 1 unit
Size: 1 unit
The iBlot® Gel Transfer Device performs western blotting transfer efficiently and reliably typically in 7 minutes or less without the need for liquid buffers. The device is integral part of the iBlot® Western Blotting System. The system consists of the device and disposable blotting stacks that contain the buffers and the transfer membrane (nitrocellulose or PVDF), and offers high quality transfer, convenience and speed. The device and the stacks are sold separately. The iBlot® system is ideal for scientists analyzing proteins through western blotting who want: • Complete protein transfer in s...
Catalog: IB1001
Size: 1 each
Size: 1 each
Invitrogen makes blotting of E-PAGE™ Gels easier and more efficient by providing a pre-cut fiber blotting pad and several types of pre-cut, pre-assembled membrane/filter paper sandwiches that perfectly fit 7.5 cm x 8.4 cm E-PAGE™ Gels*. The available nitrocellulose and Invitrolon™ PVDF membranes are designed for western transfer of proteins (Figure 1, Table 1). Pre-cut, extra-thick, absorbent Blotting Paper (2.5 mm thickness) for E-PAGE" Gels are also available to accommodate the E-PAGE™ blotting set-up using a semi-dry transfer apparatus. A protein s properties affect its ability to bind to m...
Catalog: LC2010
Size: 50 sheets
Size: 50 sheets
For the preparation and running of agarose gels. For use with RNA denatured by glyoxal treatment; one bottle containing 1 L is provided. Ambion® NorthernMax® reagents are the same components included in the NorthernMax® Ultrasensitive Northern Blotting Kits but in larger sizes. These reagents are supplied ready to use and are certified RNase-free. Comprehensive instructions are included.
Catalog: AM8678
Size: 1 L
Size: 1 L
An improved formula for preparing denaturing formaldehyde/MOPS agarose gels. Formaldehyde is included. Gels made with this buffer are considerably less brittle than conventional formaldehyde gels, making handling of the gels much easier. One bottle containing 250 mL is provided. NorthernMax® reagents are the same components included in the NorthernMax® Ultrasensitive Northern Blotting Kits but in larger sizes. These reagents are supplied ready to use and are certified RNase-free. Comprehensive instructions are included.
Catalog: AM8676
Size: 250 ml
Size: 250 ml
DryEase® Mini-Gel Cellophane is one component of the DryEase® Mini-Gel Drying System , which is a simple, easy-to-use kit for drying gels evenly using passive evaporation. The kit allows gels to be assembled on a base between two open frames, so that both outer surfaces of the gels are exposed to air. Consequently, drying is even and cracking is minimized. The proprietary Gel-Dry™ Drying Solution modulates the rate of water release to ensure crack-free gels. With the DryEase® System, gels are dried overnight with uniform tension on all points of the gel to eliminate cracking. Applications: Gel...
Catalog: NC2380
Size: 200⁄pack
Size: 200⁄pack
The StainEase¤ Gel Staining Tray is a convenient way to evenly stain mini-gels and prevent gels from breaking. The staining tray assembly includes a perforated strainer insert that holds the gel and drains away the stain, a lid, and an outer container in which stains and solutions can be changed without having to handle the gel. Easily fits up to four mini-gels.
Catalog: NI2400
Size: 2 packs
Size: 2 packs
The Bolt® Western Pack (PVDF) includes two Bolt® Mini Blot Modules and all of the buffers and pre-cut membrane/filter paper sandwiches you will need for the wet transfer of proteins from Bolt® Bis-Tris Plus gels to PVDF membranes. Each pack contains: • Bolt® Mini Blot Modules • Bolt® Transfer Buffer (20X) • Bolt® Antioxidant • PVDF pre-cut membranes (0.2 µm) About the Bolt® Mini Blot Module The Bolt® Mini Blot Module is a wet transfer device used exclusively with the Bolt® Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total with the side-by-side layout. ...
Catalog: B1000B
Size: 1 kit
Size: 1 kit
The Bolt® Western Pack (Nitrocellulose) includes two Bolt® Mini Blot Modules and all of the buffers and pre-cut membrane/filter paper sandwiches you will need for the wet transfer of proteins from Bolt® Bis-Tris Plus gels to nitrocellulose membranes. Each pack contains: • Bolt® Mini Blot Modules • Bolt® Transfer Buffer (20X) • Bolt® Antioxidant • Nitrocellulose pre-cut membranes (0.2 µm) About the Bolt® Mini Blot Module The Bolt® Mini Blot Module is a wet transfer device used exclusively with the Bolt® Mini Gel Tank. The tank accommodates one blot module per chamber, or two blot modules total ...
Catalog: B1000A
Size: 1 kit
Size: 1 kit
Invitrogen makes blotting of E-PAGE™ Gels easier and more efficient by providing a pre-cut fiber blotting pad and several types of pre-cut, pre-assembled membrane/filter paper sandwiches that perfectly fit 8.6 cm x 13.5 cm E-PAGE™ Gels*. The available nitrocellulose and Invitrolon™ PVDF membranes are designed for western transfer of proteins (Figure 1, Table 1). Pre-cut, extra-thick, absorbent Blotting Paper (2.5 mm thickness) for E-PAGE" Gels are also available to accommodate the E-PAGE™ blotting set-up using a semi-dry transfer apparatus. A protein s properties affect its ability to bind to ...
Catalog: LC2007
Size: 16⁄pack
Size: 16⁄pack
Invitrogen makes blotting easier by providing a variety of pre-cut, pre-assembled membrane/filter-paper sandwiches. A protein's properties ( i.e. , charge, hydrophobicity, etc.) affect its ability to bind to membrane surfaces. Finding the right membrane may require experimenting with your specific protein on different membranes. Store all membranes at room temperature.
Catalog: LC2002
Size: 20⁄pack
Size: 20⁄pack
This product contains three boxes of 10 sets/box of iBlot® Transfer Stack, Mini, Nitrocellulose (Cat# IB3010-02) The iBlot® Dry Blotting System efficiently and reliably transfers proteins from polyacrylamide gels in seven minutes or less without the need for buffers or an external power supply. A self-contained unit (Figure 1), the iBlot® device uses disposable blotting stacks with integrated transfer membranes (nitrocellulose and PVDF), offering the convenience of a bufferless, plug-and-play system. Compared to conventional blotting techniques, the iBlot® system enables higher downstream dete...
Catalog: IB3010-32
Size: 3 x 10 sets⁄box
Size: 3 x 10 sets⁄box
gel blot
Previous: Dot Blot | Next: Iblot® Detection & Transfer Stacks
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Dot Blot | Next: Iblot® Detection & Transfer Stacks
