DNA Sequencing System
The BigDye® Terminator v3.1 sequencing standard kit contains four tubes, each of which contains enough DNA of a known 1200 base pair sequence prepared with BigDye® Terminator v3.1 to perform one spectral calibration⁄performance check and⁄or one control sequencing run on the Applied Biosystems® 3500 Series Genetic Analyzer. The DNA contained in the preparation has been lyophilized to maximize stability. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4404312
Size: 4 tubes
Size: 4 tubes
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Catalog: 4462113
Size: 4 tubes
Size: 4 tubes
The DS-33 GeneScan™ Installation Standard consists of pooled PCR products labeled with 6-FAM™, VIC®, NED™ and PET® dyes. To generate the pooled products, CEPH individual 1347-02 genomic DNA has been amplified with 8 fluorescent PCR primer pairs which amplify selected microsatellite loci (as listed in the package product insert). The kit also contains a tube of GeneScan™ 600 LIZ™ Size Standard 2.0. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4376911
Size: 1 kit
Size: 1 kit
The Matrix Standard Kit is used to generate the "multicomponent matrix" required when analyzing 6-FAM™, VIC®, NED™, PET®, and LIZ®- labeled DNA fragments on the Applied Biosystems® 31xx, 3500 and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the five different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345833
Size: 8 runs
Size: 8 runs
This kit contains 4 oligonucleotides respectively labeled with 6-FAM™, VIC®, NED™, and ROX™, pre-pooled in a single tube. Suitable for Dye Set D spectral calibration, on ABI PRISM® Analyzers: 3100-Avant™, 3100, and 3730. Supports 4-Dye fragment analysis applications (Linkage Mapping Set v2.5, Mouse Mapping Primers). The DS-31 Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing labeled DNA fragments on the Applied Biosystems® 3130 and 3100 Series Systems, 3700 DNA Analyzer, and 3730 Series Systems. The Data Collection Software for these instruments uses t...
Catalog: 4345829
Size: 8 runs
Size: 8 runs
The DS-30 Matrix Standard kit contains 4 oligonucleotides respectively labeled with 6-FAM™, HEX™, NED™, and ROX™, pre-pooled in a single tube. This Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing fluorescent dye-labeled DNA fragments on the Applied Biosystems® 3100, 3130, and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the four different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345827
Size: 8 runs
Size: 8 runs
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500 Dx CS2 instrument and comes with a 50-cm 8-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462042
Size: 1 kit
Size: 1 kit
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500xL Dx CS2 instrument and comes with a 50-cm 24-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462043
Size: 1 kit
Size: 1 kit
The 5500 W REV1 (DNA) SP Kit contains sequencing primers and probes for DNA fragment libraries used in paired-end sequencing runs. The kit is used to prime the F5 tag for ligation sequencing on the 5500 W FlowChip V2 for DNA libraries. Each kit includes one strip tube containing sufficient specific sequencing primers and bridge probes to run 6 lanes.
Catalog: 4475684
Size: 1 kit
Size: 1 kit
This is the Site Prep and Safety Guide for the 7900HT Sequence Detection System. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4317595
Size: 1 unit
Size: 1 unit
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337458
Size: 25000 reactions
Size: 25000 reactions
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337457
Size: 5000 reactions
Size: 5000 reactions
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337456
Size: 1000 reactions
Size: 1000 reactions
The Ion Proton™ System is the first benchtop sequencing system capable of human-scale genome, exome, or transcriptome sequencing in a few hours—with DNA-to-variants called in a single day. The system combines semiconductor sequencing technology with natural biochemistry to directly translate chemical information into digital data. By leveraging the exponential improvements in the semiconductor industry (known as Moore’s Law), the Ion Proton™ Sequencing System provides an unprecedented level of scalability and flexibility to support a broad range of high throughput sequencing applications, rang...
Catalog: 4476610
Size: 1 system
Size: 1 system
Borosilicate round bottom tubes (13 mm x 65 mm) and caps for use with the Covaris™ S2 System. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4399054
Size: 125 tube
Size: 125 tube
This product can only be used to upgrade Sequencing Analysis Software v5.3.1 installed on standalone computers, computers separate to the instrument data collection system. Please talk with your representative to upgrade the data collection system and secondary analysis software running on the data collection computer. Sequencing Analysis Software enables you to basecall, trim, display, edit, and print data from our entire line of capillary DNA sequencing instruments for data analysis and quality control. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4310991
Size: 1 CD
Size: 1 CD
The Pippin Prep™ System is a small tabletop instrument that automates the size selection and collection of DNA for PGM™ sequencer libraries. Simply enter the desired base-pair target range via the software interface and after a 1.5 hr run the system will yield the programmed DNA fractions with virtually no low molecular weight contamination. The tight fragment size distributions obtained provide a more uniform template for amplification. And the processing of samples is simplified through the use of disposable pre-cast agarose gel cassettes. Benefits of the Pippin Prep™ System • Time savings c...
Catalog: 4471271
Size: 1 each
Size: 1 each
This real-time PCR-based kit is designed for the quantification of amplifiable human DNA that is present in a sample, and has been validated for human identification applications. An internal PCR control is formulated into each reaction to identify samples that may contain PCR inhibitors. • Quantifies DNA from a wide variety of sources including buccal swabs, blood, semen, tissue, and other human DNA sources making this kit suitable for casework, databasing, and paternity labs. • Chemistry compatible with commonly used extraction technologies for easy integration into current lab workflow. • P...
Catalog: 4343895
Size: 400 reactions
Size: 400 reactions
The new Ion PGM™ Sequencing 400 Kit is an integral component of the Personal Genome Machine™ sequencing platform and single-day sequencing workflow, designed to sequence templated Ion Sphere™ particles deposited in Ion 314™ Chip v2. This sequencing kit should be used in conjunction with Ion OneTouch™ 2 template preparation. The Ion PGM™ Sequencing 400 Kit provides you with: • Simple and natural sequencing chemistry • Low-cost standard reagents for lower cost per sample • Sequencing read lengths of 400 base pairs with short run times (up to 8.5 hours) • Support for Ion 314™ Chip v2 • Support fo...
Catalog: 4482002
Size: 4 sequencing runs
Size: 4 sequencing runs
The new Ion PI™ Sequencing Kit is an integral component of the Ion Proton™ sequencing platform and single-day sequencing workflow, designed to sequence templated Ion PI™ Ion Sphere™ particles deposited in Ion PI™ chips for human exome resequencing or transcriptional profiling. The Ion PI™ Sequencing 200 Kit provides you with: • Simple and natural sequencing chemistry • Low-cost standard reagents for lower cost per sample • Support for Ion PI™ chips • Support for multiplexed samples • Lower cost per run for a variety of applications, including exome and whole transcriptome sequencing The Bencht...
Catalog: 4482283
Size: 8 reactions
Size: 8 reactions
DNA Sequencing System
Previous: Dna Sequencing Protocol | Next: dna storage kits
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Dna Sequencing Protocol | Next: dna storage kits
