DNA Laddering Kit
The ApoTarget™ Quick Apoptotic DNA Ladder Detection Kit provides a simple and rapid procedure for extraction of chromosomal DNA. The procedure prepares DNA for use in the methods that detect DNA fragmentation in apoptotic cells. Unlike other kits requiring 1 to 2 days to finish, this detection method requires only less than 90 minutes to prepare DNA in a single tube without the need for extraction or column steps. DNA fragmentation can be easily visualized by agarose gel electrophoresis. This procedure increases recovery of small fragmented DNA, thereby improving the sensitivity of the assay.
Catalog: KHO1021
Size: 50 tests
Size: 50 tests
The Matrix Standard Kit is used to generate the "multicomponent matrix" required when analyzing 6-FAM™, VIC®, NED™, PET®, and LIZ®- labeled DNA fragments on the Applied Biosystems® 31xx, 3500 and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the five different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345833
Size: 8 runs
Size: 8 runs
This kit contains 4 oligonucleotides respectively labeled with 6-FAM™, VIC®, NED™, and ROX™, pre-pooled in a single tube. Suitable for Dye Set D spectral calibration, on ABI PRISM® Analyzers: 3100-Avant™, 3100, and 3730. Supports 4-Dye fragment analysis applications (Linkage Mapping Set v2.5, Mouse Mapping Primers). The DS-31 Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing labeled DNA fragments on the Applied Biosystems® 3130 and 3100 Series Systems, 3700 DNA Analyzer, and 3730 Series Systems. The Data Collection Software for these instruments uses t...
Catalog: 4345829
Size: 8 runs
Size: 8 runs
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500 Dx CS2 instrument and comes with a 50-cm 8-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462042
Size: 1 kit
Size: 1 kit
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500xL Dx CS2 instrument and comes with a 50-cm 24-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462043
Size: 1 kit
Size: 1 kit
The DS-30 Matrix Standard kit contains 4 oligonucleotides respectively labeled with 6-FAM™, HEX™, NED™, and ROX™, pre-pooled in a single tube. This Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing fluorescent dye-labeled DNA fragments on the Applied Biosystems® 3100, 3130, and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the four different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345827
Size: 8 runs
Size: 8 runs
The DS-33 GeneScan™ Installation Standard consists of pooled PCR products labeled with 6-FAM™, VIC®, NED™ and PET® dyes. To generate the pooled products, CEPH individual 1347-02 genomic DNA has been amplified with 8 fluorescent PCR primer pairs which amplify selected microsatellite loci (as listed in the package product insert). The kit also contains a tube of GeneScan™ 600 LIZ™ Size Standard 2.0. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4376911
Size: 1 kit
Size: 1 kit
The BigDye® Terminator v3.1 sequencing standard kit contains four tubes, each of which contains enough DNA of a known 1200 base pair sequence prepared with BigDye® Terminator v3.1 to perform one spectral calibration⁄performance check and⁄or one control sequencing run on the Applied Biosystems® 3500 Series Genetic Analyzer. The DNA contained in the preparation has been lyophilized to maximize stability. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4404312
Size: 4 tubes
Size: 4 tubes
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Catalog: 4462113
Size: 4 tubes
Size: 4 tubes
DNA Laddering Kit
Previous: Dna Controls, Standards & Ladders | Next: Dna Ladders
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Dna Controls, Standards & Ladders | Next: Dna Ladders
