DNA dye
The Matrix Standard Kit is used to generate the "multicomponent matrix" required when analyzing 6-FAM™, VIC®, NED™, PET®, and LIZ®- labeled DNA fragments on the Applied Biosystems® 31xx, 3500 and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the five different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345833
Size: 8 runs
Size: 8 runs
This kit contains 4 oligonucleotides respectively labeled with 6-FAM™, VIC®, NED™, and ROX™, pre-pooled in a single tube. Suitable for Dye Set D spectral calibration, on ABI PRISM® Analyzers: 3100-Avant™, 3100, and 3730. Supports 4-Dye fragment analysis applications (Linkage Mapping Set v2.5, Mouse Mapping Primers). The DS-31 Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing labeled DNA fragments on the Applied Biosystems® 3130 and 3100 Series Systems, 3700 DNA Analyzer, and 3730 Series Systems. The Data Collection Software for these instruments uses t...
Catalog: 4345829
Size: 8 runs
Size: 8 runs
The DS-30 Matrix Standard kit contains 4 oligonucleotides respectively labeled with 6-FAM™, HEX™, NED™, and ROX™, pre-pooled in a single tube. This Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing fluorescent dye-labeled DNA fragments on the Applied Biosystems® 3100, 3130, and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the four different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345827
Size: 8 runs
Size: 8 runs
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Catalog: 4462113
Size: 4 tubes
Size: 4 tubes
Contains 45 mg 6-FAM™ Dye Phosphoramidite. 6-FAM™ Dye Phosphoramidite is used for the 5’ attachment of FAM™ dye during oligonucleotide synthesis. 6-FAM™ Dye Phosphoramidite is an optically pure isomer (not a mixture). The label is treated as if it were simply another base: It is inserted at the appropriate place in the sequence and incorporated automatically. • Specialty phosphoramidites allow online addition of the label during synthesis, saving time in production of labeled probes and primers • Designed and optimized for use with ABI™ synthesizers, guaranteeing reliable nucleic acid synthesi...
Catalog: 403169
Size: 45 mg
Size: 45 mg
Contains 50 mg TET™ Dye Phosphoramidite. TET™ Dye Phosphoramidite is used for the 5’ attachment of TET™ dye during oligonucleotide synthesis. The label is treated as if it were simply another base: It is inserted at the appropriate place in the sequence and incorporated automatically. • Specialty phosphoramidites allow online addition of the label during synthesis, saving time in production of labeled probes and primers • Designed and optimized for use with ABI™ synthesizers, guaranteeing reliable nucleic acid synthesis • Life Technologies offers a range of specialty phosphoramites and linkers...
Catalog: 403171
Size: 50 mg
Size: 50 mg
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337458
Size: 25000 reactions
Size: 25000 reactions
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337457
Size: 5000 reactions
Size: 5000 reactions
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337456
Size: 1000 reactions
Size: 1000 reactions
The FISH Tag™ DNA Multicolor Kit provides a complete workflow solution for fluorescence in situ hybridization (FISH) applications. Each kit provides all of the reagents needed for probe synthesis, labeling, and purification, as well as for imaging the labeled specimen. The FISH Tag™ DNA Multicolor Kit contains fluorescent dyes in four colors, making it ideal for simultaneous localization of multiple sequence-specific DNA targets in chromosomal spreads and for in situ analysis of mitochondrial DNA localization and content. We also offer FISH Tag™ Kits in single colors. FISH Tag™ Kit Specificati...
Catalog: F32951
Size: 1 kit
Size: 1 kit
FISH Tag™ DNA Kits provide a complete workflow solution for fluorescence in situ hybridization (FISH) applications. Each kit provides all of the reagents needed for probe synthesis, labeling, and purification, as well as for imaging the labeled specimen. Choose from FISH Tag™ DNA Kits in three Alexa Fluor® colors or get the FISH Tag™ DNA Multicolor Kit , which contains four spectrally distinct dyes to allow simultaneous localization of multiple sequence-specific DNA targets in chromosomal spreads and for in situ analysis of mitochondrial DNA localization and content. FISH Tag™ Kit Specificatio...
Catalog: F32947
Size: 1 kit
Size: 1 kit
DNA dye
Previous: Dna Assembly Kits & Assays | Next: Dna Fluorescent Precipitation
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Dna Assembly Kits & Assays | Next: Dna Fluorescent Precipitation
