The MycoFluor™ Mycoplasma Detection Kit provides an ultrasensitive, rapid and simple fluorescence microscopic acid for the visual identification of mycoplasma infection in laboratory cell cultures. In order to detect mycoplasma, the fluorescent MycoFluor™ reagent is added directly to the culture medium, with or without cells, and the stained sample is then examined under a fluorescence microscope.
Size: 1 kit
Same as TaqVet Endogenous IPC Detection - Multispecies (IPCENDO) For the detection of endogenous IPC by real-time PCR using TaqMan® probes from various cellular samples from all animal species. For veterinary use only. Regulatory requirements vary by country; products may not be available in your geographic area. WARNING! BIOHAZARD. Biological samples such as tissues, body fluids, infectious agents, and blood of humans and other animals have the potential to transmit infectious diseases. All work should be conducted in properly equipped facilities using the appropriate safety equipment (for ex...
Size: 50 tests
The mir Vana™ qRT-PCR Detection Kit has been optimized to amplify specific small RNA using qRT-PCR primer sets (not included), enabling accurate quantitation of miRNA expression levels. The novel detection system can be used to characterize miRNA expression via traditional endpoint RT-PCR or real-time RT-PCR using SYBR® Green I. • Quantitative results in less than 3 hours • Detection from as little as 25 pg of total RNA • Suitable for either real-time or end-point RT-PCR • Ideal for validating expression profiling data and high-throughput applications. MicroRNAs (miRNAs) are evolutionarily con...
Size: 200 reactions
This is the Site Prep and Safety Guide for the 7900HT Sequence Detection System. For Research Use Only. Not for use in diagnostics procedures.
Size: 1 unit
Exosome – Human CD63 Isolation/Detection enables the purification of CD63+ exosomes (also called extracellular vesicles and multi-vesicular bodies) from pre-enriched cell culture samples. These exosomes can then be detected using techniques such as flow cytometry, electron microscopy, or Western blotting. The exosomes must be pre-enriched before isolation. This can be done by ultracentrifugation, or by using the fast and efficient Total Exosome Isolation (from cell culture media) reagent. • Obtain highly pure CD63+ exosomes • "See" your sample during handling • Easily scalable protocol • Detec...
Size: 3 ml
Exosome - Streptavidin for Isolation/Detection, when combined with your choice of biotinylated primary antibody, enables the purification of exosomes (also called extracellular vesicles and multi-vesicular bodies) from pre-enriched samples. These exosomes can then be detected using techniques such as flow cytometry, electron microscopy, or Western blotting. The exosomes must be pre-enriched before isolation. This can be done by ultracentrifugation, or by using the fast and efficient Total Exosome Isolation (from cell culture media) reagent. • Maximum flexibility with your choice of biotinylate...
Size: 3 ml
The Thermo-Fast® 96-well Reaction Plate can be used with Applied Biosystems® 7500 Real-Time PCR systems. • Maximum thermal conductivity for precise thermal cycling • Reproducible, specific, and sensitive PCR results For veterinary use only. Regulatory requirements vary by country; products may not be available in your geographic area. Biological hazard safety WARNING! BIOHAZARD. Biological samples such as tissues, body fluids, infectious agents, and blood of humans and other animals have the potential to transmit infectious diseases. All work should be conducted in properly equipped facilities...
Size: 25 plates
Zenon® labeling technology provides a fast, versatile, and reliable method for adding a fluorescent label to an antibody. You need only a small amount of starting material,and the method is optimized for efficient labeling of antibodies in serum, ascites fluid, or hybridoma suspensions. Antibody conjugates formed using Zenon® technology may be used in protocols where a directly labeled primary antibody is suitable, including flow cytometry, imaging, and high-throughput applications. This exclusive Molecular Probes® Zenon® labeling technology greatly simplifies the use of multiple mouse-derived...
Size: 1 kit
The cationic mitochondrial dye, 4-Di-2-ASP is a styryl with a large Stokes shift. It can also be used to stain presyntptic nerve terminals independent of neuronal activity.
Size: 1 g
The cell-permeant SYTO 82 orange fluorescent nucleic acid stain exhibits bright, orange fluorescence upon binding to nucleic acids. Because the staining pattern of the SYTO dyes in live cells may vary between cell types, we offer the SYTO Orange Fluorescent Nucleic Acid Stain Sampler Kit (S-11360) to enable researchers to find the most appropriate orange-fluorescent SYTO stain for their system.
Size: 250 µl
Trypan blue stain is a well-accepted method for staining dead cells. It can enter into cells with compromised membranes and is the method used with the Countess® automated cell counting platform.
Size: 2 × 1 ml
The cell-impermeant viability indicator ethdium homodimer-1 (EthD-1) is a high-affinity nucleic acid stain that is weakly fluorescent until bound to DNA and emits red fluorescence (excitation/emission maxima ~528/617).
Size: 1 mg
Molecular Probes® CellTracker™ fluorescent probes freely pass through cell membranes and are converted to cell-impermeant reaction products. The cell-impermeant form is passed to daughter cells through several generations but is not transferred to adjacent cells in the population. Cells that are loaded with CellTracker™ probes are typically fluorescent and viable for at least 24 hours, making these probes excellent long-term cell tracers. Furthermore, the staining pattern can be fixed with formaldehyde or glutaraldehyde to allow long-term storage of the labeled cells or tissue, to facilitate s...
Size: 1 mg
Alexa Fluor® 647 phalloidin is a high-affinity F-actin probe conjugated to our bright, photostable, far-red fluorescent Alexa Fluor® 647 dye. Selectively stains F-actin Outstanding fluorescence performance Excitation/Emission: 650/668 nm Superior to antibody staining Optimal for fixed and permeabilized samples Get Superior Results in Actin Staining Studies Phalloidin is a bicyclic peptide belonging to a family of toxins isolated from the deadly Amanita phalloides "death cap" mushroom and is commonly used in imaging applications to selectively label F-actin. Fluorescently-labeled phalloidin has...
Size: 300 units
The ER-Tracker™ Red dye is cell-permeant, live-cell stain that is highly selective for the endoplasmic reticulum (ER) that when stained using the protocol provided, the staining pattern is partially retained after fixation with formaldehyde. This stain consists of the green-fluorescent BODIPY® TR dye and glibenclamide. Glibenclamide (glyburide) binds to the sulphonylurea receptors of ATP-sensitive K + channels which are prominent on ER; the pharmacological activity of glibenclamide could potentially affect ER function. Variable expression of sulphonylurea receptors in some specialized cell typ...
Size: 100 µg
TMB (Tetramethyl Benzidine) chromogen solution may be used as a substrate for horseradish peroxidase (HRP) in ELISAs.
Size: 500 ml
Lectin PNA is specific for terminal β-galactose. It will agglutinate human erythrocytes, but only after neuraminidase treatment.[ALTREF PN40265]
Size: 1 mg
LysoSensor™ Yellow/Blue DND-160 is a ratiometric probe that can be used to measure the pH of acidic organelles, such as lysosomes. The LysoSensor dye produces blue fluorescence in neutral environments, but changes to yellow fluorescence in more acidic environments. The pK a of LysoSensor Yellow/Blue DND-160 is ~4.2.
Size: 20 × 50 µl
The FluoReporter® FITC Protein Labeling Kit provides a convenient and flexible means for attaching fluorescein (FITC, Ex/Em ~494/518 nm) to your monoclonal or polyclonal antibody (or any protein >30 kDa). The kit supplies the reagents needed for 5 to 10 labeling and separation reactions. Important Features of the FluoReporter® FITC Protein Labeling Kit: • Labeled proteins typically ready to use in under 3 hours with very little hands-on time • Optimized for 0.2–2.0 mg of protein with molecular weight >30 kDa • Labeled proteins are purified using convenient spin filters • Requires the antibody ...
Size: 1 kit