benchpro® plasmid purification instrument
The KingFisher™ Flex Magnetic Particle Processor automates sample preparation and enables easy and quick nucleic acid purification from many pathogens and sample types used in animal health diagnostics. RNA and DNA purification from 96 samples can be accomplished in 45 minutes using one script and one purification kit for all samples. • All validation data and manuals are available upon request • Only one extraction kit for all pathogens and all samples types • Same extraction protocol for RNA and DNA • Magnetic bead-based purification • Plastic consumables specific for extraction • Use of tip...
Catalog: 10232
Size: 1 instrument
Size: 1 instrument
The KingFisher™ mL Magnetic Particle Processor automates sample preparation and enables easy and quick nucleic acid purification from many pathogens and sample types used in animal health diagnostics. RNA and DNA purification from 15 samples can be accomplished in 40 minutes using one script and one purification kit for all samples. • All validation data and manuals are available upon request • Only one extraction kit for all pathogens and all samples types • Same extraction protocol for RNA and DNA • Magnetic bead-based purification • Use of tip combs to avoid contamination • 2-year warranty ...
Catalog: 10042
Size: 1 instrument
Size: 1 instrument
The PureLink® HiPure Plasmid Purification Systems are designed to isolate transfection-grade plasmid DNA from E. coli in less than 2 hours. The Maxiprep Kit protocol will typically yield 500–850 µg plasmid DNA from 100–200 ml bacterial culture, at a purity that is comparable to that achieved with two passes through cesium chloride gradients. Advantages of the PureLink® HiPure Plasmid Maxiprep Kit include: • Labor- and time-saving —No need for extra steps to remove endotoxin and other contaminants • High purity, low endotoxin product —pure enough for mammalian cell transfection • Versatility —p...
Catalog: K2100-07
Size: 25 preps
Size: 25 preps
Fast, simple protocols - Purify your plasmid DNA in less than 2 hours Labor-saving - No need for extra steps to remove endotoxin and other contaminants Megapreps and Gigapreps save time by utilizing vacuum-assisted cartridges PureLink® HiPure Plasmid Purification Systems are designed to isolate plasmid DNA of the highest purity (1) with a wide scale range (Table 1). Simple protocols an anion-exchange resin allow you to purify plasmid DNA (Figure 1) at a quality equivalent to two passes through cesium chloride gradients - the most rigorous method for DNA purification. In less than 2 hours, DNA ...
Catalog: K2100-08
Size: 4 preps
Size: 4 preps
The 7300 & 7500 Real-Time PCR Systems TaqMan® RNase P Instrument Verification Plate is used to verify the performance of the Applied Biosystems® 7300 and 7500 Real-Time PCR Systems. The 7300 & 7500 Real-Time PCR Systems TaqMan® RNase P Instrument Verification Plate is a 96-well PCR plate preloaded with the necessary reagents to detect and quantitate genomic copies of the human RNase P gene, a single-copy gene encoding the RNA moiety of the RNase P enzyme. Each well contains preloaded reaction mix (1X TaqMan® Universal PCR Master Mix, RNase P primers, and FAM™ dye–labeled probe) and template. T...
Catalog: 4350584
Size: 1 kit
Size: 1 kit
The Pippin Prep™ System is a small tabletop instrument that automates the size selection and collection of DNA for PGM™ sequencer libraries. Simply enter the desired base-pair target range via the software interface and after a 1.5 hr run the system will yield the programmed DNA fractions with virtually no low molecular weight contamination. The tight fragment size distributions obtained provide a more uniform template for amplification. And the processing of samples is simplified through the use of disposable pre-cast agarose gel cassettes. Benefits of the Pippin Prep™ System • Time savings c...
Catalog: 4471271
Size: 1 each
Size: 1 each
PureLink® PCR Purification Kits provide rapid and efficient removal of short primers, dNTPs, enzymes, short-failed PCR products, and salts from PCR products (Figure 1). The simple PureLink® bind/wash/elute procedure: provides two Binding Buffer options for fragments >100 bp or >300 bp* can be performed in either single column or 96-well plate format takes Two proprietary buffers are supplied to meet the needs of different purification requirements. Use the Binding Buffer for routine purifications of double-stranded DNA fragments from 100 bp to 12 kb. Use Binding Buffer HC for removal of primer...
Catalog: K3100-01
Size: 50 reactions
Size: 50 reactions
The QuantStudio™ Dx Real-Time PCR Instrument is a real-time PCR platform that delivers the proven performance, flexibility, expandability, and support needed to meet the evolving needs of the clinical laboratory today and tomorrow. The QuantStudio™ Dx instrument is approved for in vitro diagnostic (IVD) use with the Quidel® Molecular Direct C. difficile Assay, the first available from a growing menu of assays that are under development. In Test Development Mode, the QuantStudio™ Dx Real-Time PCR Instrument offers easy-to-change blocks that can also accommodate array cards, as well as 96-well s...
Catalog: 4480299
Size: 1 instrument
Size: 1 instrument
The Ion Chef™ System* is the next generation of workflow simplification products for the Ion Proton™ and Ion PGM™ systems. The Ion Chef™ System provides automated, high-throughput template preparation and reproducible chip loading for users at any experience level. With typically less than 15 minutes of hands-on time, an intuitive touch-screen interface, and significantly higher productivity than the Ion OneTouch™ 2 System, the Ion Chef™ System makes the Ion Torrent™ sequencing workflow accessible for every lab. The Ion Chef™ System: • Simplifies the workflow • Minimizes sources of user-introd...
Catalog: 4484177
Size: 1 system
Size: 1 system
Zero Blunt® TOPO® PCR Cloning Kits offers the fastest and easiest method for high-efficiency (cloning of blunt-end PCR products amplified with proofreading thermostable polymerases. The kits include linearized and topoisomerase I-activated pCR®-Blunt II-TOPO® Vector for 5-minute benchtop ligations without ligase (1). The pCR®-Blunt II-TOPO® Vector also features: • ccdB gene for positive selection (2) • Eco R I sites flanking the PCR product insertion site for easy excision of inserts • Kanamycin and Zeocin™ resistance genes for your choice of selection in E. coli • SP6 promoter/primer site for...
Catalog: K2800-02
Size: 20 preps
Size: 20 preps
This is a cold block for use with the ARCTURUS® HistoGene® LCM Immunofluorescence Staining Kit. For Research Use Only. Not for use in diagnostics procedures.
Catalog: HIS0101
Size: 1 each
Size: 1 each
ARCTURUS® laser capture microdissection (LCM) instruments offer a unique combination of infrared (IR) laser capture and ultraviolet (UV) laser cutting, permitting the use of any slide type and any sample preparation for microdissection. While plain glass slides are effectively used for standard IR-based LCM, polyethylene naphthalate (PEN) membrane slides facilitate this Arcturus®-exclusive dual laser function and allow you to determine the appropriate sample preparation based on your application need. Plain Glass Slides The ARCTURUS® instruments are the only LCM systems that allow efficient us...
Catalog: LCM0522
Size: 50 each
Size: 50 each
The ARCTURUS® Paradise® PLUS FFPE RNA Isolation Kit permits unprecedented gene expression analysis of millions of previously inaccessible samples by unlocking RNA from formalin-fixed, paraffin-embedded (FFPE) tissues. Amplify as little as 5 ng of the isolated fixed RNA using reagents and methods that have been specially optimized to overcome the challenges of cross-linked FFPE templates (Figure 1). Secure Downstream Success with the Paradise® QC Kit Not all FFPE samples contain high quality RNA. Identify the best samples for your studies using a simple, real-time PCR research technique, and th...
Catalog: KIT0312-I
Size: 12 samples
Size: 12 samples
Specially designed for use with the ARCTURUS® Laser Capture Microdissection (LCM) instruments, CapSure® HS and CapSure® Macro LCM Caps enable the precise and rapid extraction of pure populations of cells from heterogeneous sample preparations. CapSure Caps may be used to isolate individual cells or thousands of cells on a single cap. Key product features: • Gentle application – non-damaging microdissection preserves the integrity of the captured material • Versatile extraction – capture both large and small amounts of cells Ensure the Integrity of Microdissected Cells for Downstream Molecular ...
Catalog: LCM0214
Size: 32 caps
Size: 32 caps
• The Heat Equalizing Block is an aluminum conduction plate for use with the SSP UniTray and other laboratory procedures that require even heat distribution during thermal cycling. The Heat Equalizing Block is set on top of the SSP UniTray while thermal cycling to ensure even heat distribution • The Membrane Comb Loading Tray is for convenient benchtop loading of 64-lane membrane combs. Polycarbonate tray with two rows of 64 wells, each 2 mm wide • HLA Beyond Tears - By Glenn E. Rodey, Second Edition (De Novo, Inc., Durango, CO 2000) Serves as an introductory text for individuals who are inter...
Catalog: 90000-1D
Size: 1 each
Size: 1 each
A suite of accessories has been designed to enable research on living cells using your ArcturusXT™ LCM Instrument. Researchers may use slides or Petri dishes to perform imaging and microdissection experiments. Following a validated protocol from Arcturus® LCM Systems from Applied Biosystems—the leaders in tissue-based microdissection—the live cells may be isolated, remaining viable for subsequent re-culture or direct processing for use in downstream applications. Polyethylene naphthalate (PEN) Membrane Frame Slides for Live Cell Microdissection • Specially optimized for use with live cell expe...
Catalog: LCM0531
Size: 25 each
Size: 25 each
POP-6™ is a denaturing polymer used on the 310 Genetic Analyzer. POP-6™ Polymer is used for sequencing applications. • Easy to Use: Pre-formulated, which not only saves time but also saves reproducibility by ensuring consistent formulation. • Robust Formulation: Formulated for sequencing and fragment analysis applications. • Replenishable: Allow capillaries to be used multiple times. Reproducible Results POP™ polymers dynamically coat the capillary wall to control electro-osmotic flow. Their definite quality and uniform consistency eliminate guesswork and help to ensure reproducibility. POP Po...
Catalog: 402837
Size: 3 ml
Size: 3 ml
The BigDye® Terminator v3.1 sequencing standard kit contains four tubes, each of which contains enough DNA of a known 1200 base pair sequence prepared with BigDye® Terminator v3.1 to perform one spectral calibration⁄performance check and⁄or one control sequencing run on the Applied Biosystems® 3500 Series Genetic Analyzer. The DNA contained in the preparation has been lyophilized to maximize stability. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4404312
Size: 4 tubes
Size: 4 tubes
benchpro® plasmid purification instrument
Previous: Benchpro® 4100 Western Processing System | Next: benchpro® system
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Benchpro® 4100 Western Processing System | Next: benchpro® system
