Analyze DNA
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500 Dx CS2 instrument and comes with a 50-cm 8-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462042
Size: 1 kit
Size: 1 kit
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500xL Dx CS2 instrument and comes with a 50-cm 24-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462043
Size: 1 kit
Size: 1 kit
The Matrix Standard Kit is used to generate the "multicomponent matrix" required when analyzing 6-FAM™, VIC®, NED™, PET®, and LIZ®- labeled DNA fragments on the Applied Biosystems® 31xx, 3500 and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the five different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345833
Size: 8 runs
Size: 8 runs
The DS-33 GeneScan™ Installation Standard consists of pooled PCR products labeled with 6-FAM™, VIC®, NED™ and PET® dyes. To generate the pooled products, CEPH individual 1347-02 genomic DNA has been amplified with 8 fluorescent PCR primer pairs which amplify selected microsatellite loci (as listed in the package product insert). The kit also contains a tube of GeneScan™ 600 LIZ™ Size Standard 2.0. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4376911
Size: 1 kit
Size: 1 kit
This kit contains 4 oligonucleotides respectively labeled with 6-FAM™, VIC®, NED™, and ROX™, pre-pooled in a single tube. Suitable for Dye Set D spectral calibration, on ABI PRISM® Analyzers: 3100-Avant™, 3100, and 3730. Supports 4-Dye fragment analysis applications (Linkage Mapping Set v2.5, Mouse Mapping Primers). The DS-31 Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing labeled DNA fragments on the Applied Biosystems® 3130 and 3100 Series Systems, 3700 DNA Analyzer, and 3730 Series Systems. The Data Collection Software for these instruments uses t...
Catalog: 4345829
Size: 8 runs
Size: 8 runs
The AmpFLSTR® Yfiler® Direct Kit enables forensic laboratories to perform high-quality Y-STR analysis of single-source reference samples using direct PCR amplification. This kit amplifies the same 17 Y-STR loci as the AmpFLSTR® Yfiler® Kit and is designed to generate accurate results with faster thermocycling conditions than the Yfiler® Kit. Blood or buccal samples on treated paper (FTA® Card or NUCLEIC-CARD™ System ) can be punched into PCR plates or tubes and taken directly to PCR amplification, without reduction in data quality. Samples collected with the Buccal DNA Collector™ and other unt...
Catalog: 4477555
Size: 250 tests
Size: 250 tests
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Catalog: 4462113
Size: 4 tubes
Size: 4 tubes
The DS-30 Matrix Standard kit contains 4 oligonucleotides respectively labeled with 6-FAM™, HEX™, NED™, and ROX™, pre-pooled in a single tube. This Matrix Standard Set is used to generate the "multicomponent matrix" required when analyzing fluorescent dye-labeled DNA fragments on the Applied Biosystems® 3100, 3130, and 3730 Series Systems. The Data Collection Software for these instruments uses the multicomponent matrix to automatically analyze the four different colored fluorescent dye-labeled samples in a single capillary. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4345827
Size: 8 runs
Size: 8 runs
The BigDye® Terminator v3.1 sequencing standard kit contains four tubes, each of which contains enough DNA of a known 1200 base pair sequence prepared with BigDye® Terminator v3.1 to perform one spectral calibration⁄performance check and⁄or one control sequencing run on the Applied Biosystems® 3500 Series Genetic Analyzer. The DNA contained in the preparation has been lyophilized to maximize stability. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4404312
Size: 4 tubes
Size: 4 tubes
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337458
Size: 25000 reactions
Size: 25000 reactions
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337456
Size: 1000 reactions
Size: 1000 reactions
The BigDye® Terminator v3.1 Cycle Sequencing Kit's robust, highly flexible chemistry is ideal for de novo sequencing, resequencing, and finishing with PCR product, Plasmid, Fosmid, and BAC templates. • Improve the quality of your results for a wide range of sequencing applications. • Optimized for long read lengths. • Better dye mobility characteristics • Improved performance reading through GT rich regions. • Get longer, higher-quality reads with more uniform peak heights and optimal signal balance. • Enhance your productivity and reduce costs. Get More Uniform Peak Heights, Improved Accuracy...
Catalog: 4337457
Size: 5000 reactions
Size: 5000 reactions
The GeneScan™ 1200 LIZ® Size Standard is a fifth dye (LIZ®) labeled high density size standard for the reproducible sizing of fragment analysis samples. The standard contains 68 LIZ® dye-labeled, single-stranded DNA fragments. Since the standard is labeled with the fifth dye, users can genotype a greater number of markers in a given lane, compared to the four-dye system. GeneScan™ 1200 LIZ® Size Standard is designed for sizing DNA fragments in the 20-1200 nucleotides range and provides 68 single-stranded labeled fragments of: 20, 30, 40, 60, 80, 100, 114, 120, 140, 160, 180, 200, 214, 220, 240...
Catalog: 4379950
Size: 800 reactions
Size: 800 reactions
The GeneScan™ 500 LIZ® Size Standard is a fifth dye-labeled size standard for the reproducible sizing of fragment analysis data. GeneScan™ 500 LIZ® Size Standard is designed for sizing DNA fragments in the 35-500 nucleotides range and provides 16 single-stranded labeled fragment of: 35, 50, 75, 100, 139, 150, 160, 200, 250, 300, 340, 350, 400, 450, 490 and 500 nucleotides. The sizing curve generated from these fragments make the GeneScan™ 500 LIZ® Size Standard ideal for a variety of fragment analysis applications such as Microsatellites, Fragment Length Polymorphisms and Relative Fluorescent ...
Catalog: 4322682
Size: 800 reactions
Size: 800 reactions
GeneScan™ 1000 ROX™ Size Standard is an internal lane size standard developed for use with Applied Biosystems® fluorescence-based DNA electrophoresis systems. The use of an internal lane size standard during electrophoresis enables automated data analysis and precise DNA fragment size comparisons between electrophoresis runs. GeneScan™ 1000 ROX™ Size Standard is designed for sizing DNA fragments in the 47–946 bp range and provides labeled fragments of 47, 51, 55, 82, 85 93 99, 126, 136, 262, 293, 317, 439, 557, 692, 695 and 946 bases. Each of the DNA fragments is labeled with ROX™ fluorophore,...
Catalog: 401098
Size: 400 reactions
Size: 400 reactions
GeneScan™ 500 TAMRA™ Size Standard is an internal lane size standard developed for use with the Applied Biosystems fluorescence- based DNA electrophoresis systems. The use of an internal lane size standard during electrophoresis enables automated data analysis and precise DNA fragment size comparisons between electrophoresis runs. GeneScan™ 500 TAMRA™ Size Standard is designed for sizing DNA fragments in the 35-500 bp range and provides 16 single-stranded labeled fragments of 35, 50, 75, 100, 139, 150, 160, 200, 250, 300, 340, 350, 400, 450, 490, and 500 bases. Each of the DNA fragments is lab...
Catalog: 401733
Size: 800 reactions
Size: 800 reactions
The GeneMapper® Software v4.1 Demo will install client and server configurations on the same computer. The demo version has full functionality for 30 days from installation and can be upgraded to the full version upon purchase of GeneMapper® Software v4.1 Full. GeneMapper® Software is a flexible genotyping software package that provides DNA sizing and quality allele calls for all Life Technologies electrophoresis-based genotyping systems. This software specializes in multiapplication functionality, including amplified fragment length polymorphism (AFLP®), loss of heterozygosity (LOH), microsat...
Catalog: 4366851
Size: 1 copy
Size: 1 copy
This product can only be used to upgrade Sequencing Analysis Software v5.3.1 installed on standalone computers, computers separate to the instrument data collection system. Please talk with your representative to upgrade the data collection system and secondary analysis software running on the data collection computer. Sequencing Analysis Software enables you to basecall, trim, display, edit, and print data from our entire line of capillary DNA sequencing instruments for data analysis and quality control. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4310991
Size: 1 CD
Size: 1 CD
Analyze DNA
Previous: All Kits | Next: Assembly Kits
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: All Kits | Next: Assembly Kits
