Ab 2720
Properly controlled IHC stains require that a non-immune immunoglobulin equivalent of the primary antibody be run on the sample tissue in the same way that the primary antibody is run. Any positive staining would indicate that the primary antibody stain may not be specific. These reagents can be used as negative isotype controls for our predilute primary antibodies.
Catalog: 08-6199
Size: 18 ml
Size: 18 ml
AB-Human Serum (heat-inactivated)
Catalog: 34005-100
Size: 100 ml
Size: 100 ml
AB-TUBE-ANTI--MYC
Catalog: 460603
Size: 1 each
Size: 1 each
The Ion Total RNA-Seq Kit for AB Library Builder™ System combines optimized reagents and protocols for automated preparation of representative cDNA libraries for strand-specific RNA sequencing of all types of RNA species on the Ion Personal Genome Machine (PGM™) and Proton™ sequencers. Either small RNA (such as microRNA) or whole transcriptome RNA samples can be prepared for next-generation sequencing. The Ion Total RNA-Seq Kit for AB Library Builder™ System contains the same performance advantages as the manual Ion Total RNA-Seq Kit v2 with the convenience of protocol automation. The gel size...
Catalog: 4482416
Size: 13 reactions
Size: 13 reactions
The Ion Total RNA Library Protocol Card for AB Library Builder™System is required for running the Ion Total RNA-Seq Kit for AB for Library Builder™System . This protocol card contains the firmware needed to easily automate the creation of up to 13 whole transcriptome or small RNA (miRNA) libraries upstream of semiconductor sequencing on either the Ion PGM™ or Ion Proton™ platforms. The Ion Total RNA Library Protocol Card for AB Library Builder™System: • Enables whole transcriptome or small RNA (miRNA) library construction on the AB Library Builder™System • Eliminates the need for instrument pr...
Catalog: 4482563
Size: 1 card
Size: 1 card
The Applied Biosystems® MicroAmp® Optical 96-Well Reaction Plate is optimized to provide unmatched temperature accuracy and uniformity for fast, efficient PCR amplification. This plate, constructed from a single rigid piece of polypropylene in a ninety-six well format is compatible with Applied Biosystems® 96-Well Real-Time PCR Systems and Thermal Cyclers. • Frosted to minimize interfering fluorescence from wells of cycling block in real-time PCR applications • Screened to eliminate auto-fluorescent plates • Unique design provides a barrier to ambient air to help insure well-to-well temperatur...
Catalog: N8010560
Size: 10 plates
Size: 10 plates
The Applied Biosystems® MicroAmp® Optical Adhesive Film reduces the chance of well-to-well contamination and sample evaporation when applied to a microplate. • Pressure-sensitive adhesive provides a tight seal over every well • Will not interfere with sample reading • Press-N-Seal: Align properly to the plate, then press to seal • Easy to apply-will not stick to your glove Prevent Loss of Precious Samples Use this optically-clear adhesive film to seal the samples into the wells of a microplate. This will reduce the possibility of cross-contamination between sample wells and help ensure consist...
Catalog: 4360954
Size: 25 covers
Size: 25 covers
The Applied Biosystems® MicroAmp® 96-Well Tray for VeriFlex™ Blocks is specifically designed to snugly hold MicroAmp® Fast Reaction Tubes with Caps and MicroAmp® Fast 8-Tube Strips (0.1 mL) in a 96-well format. They are also designed to snugly hold MicroAmp® Reaction Tubes with Caps (0.2 mL). Engineered for efficient sample processing Designed specifically for MicroAmp® Fast Reaction Tubes with Caps (0.1 mL) and MicroAmp® Fast 8-Tube Strips (0.1 mL) Designed specifically for MicroAmp® Reaction Tubes with Caps (0.2 mL) Manufactured to high specification, ensuring a quality product Convenience a...
Catalog: 4379983
Size: 10 trays
Size: 10 trays
Applied Biosystems® MicroAmp® Optical Film Compression Pads are designed to support a proper thermal seal between the thermal cycler and reaction plates when using adhesive films. Note: See user's manual or package insert for limited label license, and trademark information. For Research Use Only. Not for use in diagnostics procedures.
Catalog: 4312639
Size: 5 each
Size: 5 each
The MicroAmp® Cap Installing Tool helps you install strips of MicroAmp® caps onto MicroAmp® reaction tubes in a tray⁄retainer set or 96-well reaction plate. • Available in handle style • Seal 8 or 12 cap strips • Recessed cup for pressing caps onto tubes • Convenient tool ensures proper sealing Press and Seal Caps The MicroAmp® Cap Installing Tool enables you to ergonomically seal MicroAmp® reaction tubes and plates. This tight seal will prevent well-to-well contamination and sample loss. Used With MicroAmp® Optical 8-Cap Strip, MicroAmp® Optical 8-Tube Strip, 0.2 ml, MicroAmp® Optical 96-Well...
Catalog: 4330015
Size: 1 tool
Size: 1 tool
Applied Biosystems® MicroAmp® Caps Strips are designed to fit on MicroAmp® 0.2 mL Reaction Tubes, Reaction Tube Strips, and 96-Well Reaction Plates. They are available in 8-cap and 12-cap strips in clear and colored sets of red, orange, blue, and green. The MicroAmp® Optical 8-Cap Strip should be used for real-time PCR applications. Attach caps using the MicroAmp® Cap Installing Tool. Will not interfere with sample reading Provides tight seal to minimize evaporation Easy to apply and remove Minimizes Evaporation Use MicroAmp® Caps Strips to seal the tubes containing your precious samples. This...
Catalog: N8010834
Size: 200 strips of Assorted Colors
Size: 200 strips of Assorted Colors
Use Applied Biosystems® MicroAmp® Adhesive Film Applicator to form a tight seal between a microplate and an adhesive film. Form a Tight Seal The MicroAmp® Adhesive Film Applicator enables you to ergonomically push an adhesive film down upon a microplate to form a tight seal and minimize air bubbles. This tight seal will prevent well-to-well contamination and sample loss. Quick and Easy Use the MicroAmp® Adhesive Film Applicator to speed the process of sealing multiple microplates. This tool is designed according to the microplate dimensions so you can quickly seal a microplate. The rugged prop...
Catalog: 4333183
Size: 5 applicators
Size: 5 applicators
The Applied Biosystems® MicroAmp® Caps Strips are designed to fit on MicroAmp® Reaction Tubes, reaction strips and 96-well plates. They are available in 8-cap and 12-cap strips in clear and colored sets of red, orange, blue, and green. MicroAmp® Optical 8-Cap Strip should be used for Real-Time PCR applications. Attach caps using the MicroAmp® Cap Installing Tool. • Will not interfere with sample reading • Provides tight seal to minimize evaporation • Easy to apply and remove Minimize Evaporation Use MicroAmp® Caps Strips to seal the tubes containing your precious samples. This will reduce the ...
Catalog: N8010535
Size: 300 strips
Size: 300 strips
Ab 2720
Previous: Templated Bead Preparation Kits & Reagents | Next: Ab 8200 Cellular Detection System
View products by:
Title |
Brand |
Price |
Popularity |
Best Sellers
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title |
Popularity |
Our Choices |
All-Round Favourites |
Title
Previous: Templated Bead Preparation Kits & Reagents | Next: Ab 8200 Cellular Detection System
