Products from 3500 Dx Series Sequencing Standard, Big Dye® Terminator V1.1 to 5500 W Paired-End Reagents Kit
This BigDye® Terminator v1.1 sequencing standard consists of four tubes, each of which contains DNA of a known 1,200 base pair sequence prepared with BigDye® Terminator v1.1. Sufficient DNA is included to perform one spectral calibration⁄performance check and⁄or one control sequencing run on an Applied Biosystems® 3500 Dx Series genetic analyzer. The DNA preparation has been lyophilized to maximize stability.
Catalog: 4462113
Size: 4 tubes
Size: 4 tubes
This cap may be placed on an open 3500 Series polymer pouch when the pouch is to be stored.
Catalog: 4462785
Size: 4 caps
Size: 4 caps
This is a pump cleaning kit for the 3500 Series platform. It is highly recommended that a field service engineer perform any necessary pump cleaning.
Catalog: 4461875
Size: 1 each
Size: 1 each
The BigDye® Terminator v3.1 sequencing standard kit contains four tubes, each of which contains enough DNA of a known 1200 base pair sequence prepared with BigDye® Terminator v3.1 to perform one spectral calibration⁄performance check and⁄or one control sequencing run on the Applied Biosystems® 3500 Series Genetic Analyzer. The DNA contained in the preparation has been lyophilized to maximize stability. For Research Use Only. Not intended for human or animal therapeutic or diagnostic use.
Catalog: 4404312
Size: 4 tubes
Size: 4 tubes
The 3500 Dx Genetic Analyzer CS2 is the latest addition to our family of Applied Biosystems® genetic analyzers based on capillary electrophoresis. The 3500 Dx Genetic Analyzer CS2 is an IVD-labeled instrument, making it the first Sanger sequencing platform cleared for sequencing analysis of DNA. Confidence in Your Results • The 3500 Dx Genetic Analyzer CS2 is an IVD-labeled platform for Sequencing-Based Typing using SeCore® HLA typing kits. Sanger sequencing is known as the “gold-standard” for its accuracy, reliability, and ease of use. It is also used for confirmatory sequencing by clinical l...
Catalog: 4461447
Size: 1 system
Size: 1 system
This kit includes all of the consumables and accessories needed to perform an instrument qualification—install, operational, or/and performance. This kit is specific for the 3500xL Dx CS2 instrument and comes with a 50-cm 24-capillary array, POP-6™ polymer, and Big Dye® Terminator v1.1 sequencing standard.
Catalog: 4462043
Size: 1 kit
Size: 1 kit
The 384-Well Calibration Kit is used to maintain your real-time PCR instrument with 384-well block. The kit includes region of interest (ROI), background, and dye calibrations, as well as RNaseP verification. Please see your instrument user guide for full instructions on use.
Catalog: 4432476
Size: 1 kit
Size: 1 kit
The 384-Well Dye Calibration Plate (FAM™) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432445
Size: 1 plate
Size: 1 plate
The 384-Well Dye Calibration Plate (ROX™) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432458
Size: 1 plate
Size: 1 plate
The 384-Well Dye Calibration Plate (TAMRA™) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4443619
Size: 1 plate
Size: 1 plate
The 384-Well Dye Calibration Plate (VIC®) is used to maintain your real-time PCR instrument with 384-well block. Dye calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432452
Size: 1 plate
Size: 1 plate
The 384-Well Normalization Kit is used to maintain your real-time PCR instrument with 384-well block. Normalization plates are used to calibrate different instruments. The kit contains one FAM™/ROX™ normalization plate and one VIC®/ROX™ normalization plate. Please see your instrument user guide for full instructions on use.
Catalog: 4432620
Size: 2 plates
Size: 2 plates
The 384-Well RNaseP Verification Plate is used to verify your real-time PCR instrument with 384-Well Block. Confirm the performance of your instrument by running the RNaseP assay. Please see your instrument user guide for full instructions on use. The 384-Well RNaseP Verification Plate is preloaded with the necessary reagents to detect and quantitate genomic copies of the human RNase P gene, a single-copy gene encoding the RNA moiety of the RNase P enzyme. Each well contains preloaded reaction mix (1X TaqMan® Universal PCR Master Mix, RNase P primers, and FAM™ dye-labeled probe) and template. ...
Catalog: 4432500
Size: 1 plate
Size: 1 plate
The 384-Well ROI & Background Calibration Kit is used to maintain your real-time PCR instrument with 384-well block. Region of interest (ROI) and background calibration should be run after lamp change. Please see your instrument user guide for full instructions on use.
Catalog: 4432482
Size: 2 plates
Size: 2 plates
Our 4-acetamido-4'-maleimidylstilbene-2,2'- disulfonic acid is a thiol-reactive reagent that is water soluble, with high polarity and membrane impermeability. This polysulfonated dye is useful for determining whether thiol-containing proteins and polypeptide chains are exposed at the extracellular or cytoplasmic membrane surface.
Catalog: A-485
Size: 25 mg
Size: 25 mg
DASPMI (4-Di-1-ASP) is a styryl dye stains mitochondria of live cells. This dye has a large fluorescence Stokes shift and is taken up relatively slowly as a function of membrane potential.
Catalog: D-288
Size: 1 g
Size: 1 g
The cationic mitochondrial dye, 4-Di-2-ASP is a styryl with a large Stokes shift. It can also be used to stain presyntptic nerve terminals independent of neuronal activity.
Catalog: D-289
Size: 1 g
Size: 1 g
DNDS is a stilbene sulfonate that can be used to inhipit anionic transport.
Catalog: D-673
Size: 1 g
Size: 1 g
Gibco® 4% Agarose is an autoclaved, high purity, low melting point gel designed for plaque assays and the purification of baculovirus. The 4% Agarose Gel melts at 65 – 70°C and remains fluid at 37°C. When diluted with concentrated insect cell culture medium, Gibco® 4% Agarose produces a gel firm enough to immobilize local infections, yet ductile enough to allow for the efficient removal of plaques for clonal expansion. Product Use For Research Use Only. Not for use in diagnostic procedures.
Catalog: 18300-012
Size: 40 ml
Size: 40 ml
Carboxy-DCFDA can passively diffuse into cells and is colorless and nonfluorescent until the acetate groups are cleaved by intracellular esterases to yield the fluorescent fluorophore, 5-(and-6)-carboxy-2',7' -dichlorofluorescein. With a pK a of 4.8, this dye can be used as an acidic pH sensor.
Catalog: C-369
Size: 100 mg
Size: 100 mg
Cells can naturally incorporate the thymidine analog BrdU into their cells during cell division, making this nucleoside analog an excellent marker of by cell cycle and proliferation. Analysis of incorporated BrdU can be with an anti-BrdU antibody.
Catalog: B23151
Size: 100 mg
Size: 100 mg
Detect global RNA transcription temporally and spatially in both in-vitro and in-vivo with the modified nucleotide, ethynyl uridine (EU, E10345) or in kit form with Click-iT Nascent RNA capture kit, C-10365. Both approaches use powerful click chemistry detection, a simple and robust two-step technique. In step one, the alkyne-containing biomolecule is fed to cells or animals and actively incorporated into RNA. Detection utilizes the chemoselective ligation or “click" reaction between an azide and an alkyne where the modified protein is detected with a corresponding azide-containing dye or hapt...
Catalog: E-10345
Size: 5 mg
Size: 5 mg
5’ Phosphate labeled oligo
Catalog: 4326342
Size: 80,000 pmol
Size: 80,000 pmol
5’-Fluorescent labeled oligo: 10,000 picomoles
Catalog: 450007
Size: 10,000 pmol
Size: 10,000 pmol
5% Digitonin is a detergent solution used to prepare native protein samples for use with the NativePAGE™ Gel System. Also included in the NativePAGE™ Sample Prep Kit, this ready-to-use detergent solution improves solubility of hydrophobic and membrane proteins during sample preparation. The samples prepared with 10% DDM, 5% Digitonin, or the NativePAGE™ Sample Prep Kit are compatible with NativePAGE™ Novex Bis-Tris Gels for native electrophoresis showing increased resolution and reduced streaking.
Catalog: BN2006
Size: 1 ml
Size: 1 ml
Denhardt's Solution is a mixture of blocking agents used in membrane-based hybridization protocols. The solution contains 1% Ficoll (type 400), 1% polyvinylpyrrolidone, and 1% bovine serum albumin. Sterile filtered.
Catalog: 750018
Size: 100 ml
Size: 100 ml
The 5500 W Barcode Conversion Primers 1-16 Kit contains barcoded primers for libraries constructed with truncated adaptors, such as Agilent Technologies' SureSelect™ libraries, for multiplex sequencing on 5500 W Series genetic analyzers. This kit does not contain 5500 W Conversion Enzyme and should be used in conjunction with the 5500 W Conversion Primers Kit . This kit contains primers for 16 barcodes.
Catalog: 4481067
Size: 48 reactions
Size: 48 reactions
The 5500 W FlowChip V2 is a microfluidic glass device with primers on the surface that enable amplification of library template onto the FlowChip for ligation sequencing on the 5500 W Series genetic analyzers. The 5500 W FlowChip V2 is specially designed with precisely cut lanes. Individual library samples can be deposited for amplification in each lane of the FlowChip. Sequencing reagents are delivered to each lane separately, enabling consumption of sequencing reagents for just the number of lanes used for sequencing. The 5500 W FlowChip V2 is notched to set the orientation. Each 5500 W Flow...
Catalog: 4475661
Size: 1 kit
Size: 1 kit
5500 W FWD Sequencing Reagent (SR) kits contain the phosphatase and probes needed for ligation sequencing with 2-base encoded (2BE) probes on the 5500 W series genetic analyzers. The 5500 W FWD SR75 Kit consists of an 8-well striptube that contains sufficient phosphatase and probes to run up to 510 cycles and is best configured for sequencing read-lengths up to 75 bases with a 10-base barcode for 6 lanes.
Catalog: 4475669
Size: 1 kit
Size: 1 kit
The 5500 W Paired-End Reagents Kit is used for paired-end sequencing runs for ligation sequencing of the F5 Tag. This kit contains sufficient enzyme, dNTPs, and buffers for 6 lanes. In addition to 5500 W Run Cycle Buffers and 5500 W Buffer D (Reset), this kit requires the use of 5500 W Buffer H.
Catalog: 4475670
Size: 1 kit
Size: 1 kit
Products from 3500 Dx Series Sequencing Standard, Big Dye® Terminator V1.1 to 5500 W Paired-End Reagents Kit
View topsellers by:
Title |
Brand |
Price |
Popularity |
Favourites
Popular items by:
Popularity |
Our Choices |
All-Round Favourites |
Title
